justyoumarket 
Nowadays, there are so many products of 2 gallon hot water tank in the market and you are wondering to choose a best one. You have searched for 2 gallon hot water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 2 gallon hot water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free
WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free
Funwill Electric Mini-Tank Water Heater Household Kitchen Electrical Hot Water 2-Gallon (USA Shipping)
- 【MINI WATER HEATER】Size:9.4*8.2*13 inch,2.5 gallon point-of-use . The wire size takes 31.49 inch .For small sink. Easy to install and eficient.The hot water systems is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.
- 【ENERGY SAVING】The Mini heater total power is 1500w, which heats up quickly and saves heating time.One-piece compact insulation, up to 5-6cm insulation layer, temperature drop, reducing energy consumption.The temperature can be adjusted between 55℃– 75℃ optionally, and the power will be off automatically when the set temperature is achieved.
- 【STAINLESS STEEL HEATING TUBE】The water heater adopts 316 stainless steel pipe, which can reach 1400 degree working temperature and has strong anti-pollution ability, which can adapt to various complicated water quality environments.
- 【FASHIONABLE AND SPACE-SAVEING】The small hot water tank can be placed in the space exquisitely.Can be installed in the kitchen, rest room, bathroom or any other places you want optionally.The mini hot water tank uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing.
- 【SAFETY】Moisture-proof and splash-proof: One-piece molding, strong and reliable, preventing environmental erosion in the bathroom kitchen. Overpressure protection: When the pressure of the liner exceeds the safety rated pressure, the safety relief valve automatically relieves pressure to protect the liner and your safety. Prevent dry burning: When the inner tank is dry and dry, the secondary insulation protection immediately cuts off the power supply and automatically stops working.
Camplux ME60 Mini Tank Electric Water Heater 6-Gallon,1.44kW at 120 Volts
- 6-gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.
- Electric water heater is easy to maintain and has glass-lined tank for long service life
- Thermostat Control allows adjustment of water temperature.High Limit device provide protection while overheating.
- Plugs into 120 volt outlet for independent installation or in-line with a large hot water source.(Max. water pressure is 150 PSI,CSA listed Temperature & Pressure relief valve included)
- Can be shelf, wall or floor mounted (bracket included)
- Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Product dimension:15.75″ W x 21″ H x 15.5″ D.
Similar items with 4 stars and above
Watts DET-5 2.1 G Potable Water Expansion Tank for 50-Gallon Water Heaters
- Protects the water heater from thermal expansion^Absorbs the increased volume of water created when water is heated^For water heaters up to 50-Gallon^Contains a durable membrane to prevent contact of water with air in the tank^Pre-pressurized steel tank at 20 psi
Flextrol FTH30 Hydronic Expansion Tanks-for Hot Water Heaters, Carbon Steel Shell 3/4 Inch MIP Connection, SBR Synthetic Rubber, 60 PSI, 210 Degrees Fahrenheit, Gray Color, 4.8 Gallons
- Hydronic Expansion Tanks Are Diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings
- Hydronic (Forced Hot Water) Expansion Tanks Absorb the Expansion of Water in Residential or Commercial Hydronic Heating and Cooling Systems
- Low Profile Tank Design with Full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle
- Hydronic Non-Potable Expansion Tank for Closed Hot Water Heating Systems, Boilers
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made In Italy
- Certified Synthetic SBR Rubber Diaphragm
What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.
Technical Features
- Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description
- Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions
- Max. Operating Pressure: 60 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTH30
- Tank Size: 4.8 Gallons
- Tank Weight: 6.8 Pounds
- Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 12" x 12" x 16"
- Acceptance Volume: 3.0 Gallons
- UPC Code: 80459513075
Thermoflow Electric Tankless Water Heater, Point of Use Hot Water Heater for Sinks, 3.5kW at 240 Volts, Wall Mounted
- ➤ TANKLESS – Save up to 60% on your water heating cost with an Thermoflow electric tankless water heater .Distribution, start-up and technical systems losses as well as circulation and storage losses are eliminated.
- ➤ ENDLESS HOT WATER – No need to preheat before using.As soon as you open the tap, the water flows with your desired temperature.High efficient,saving energy.
- ➤ COMPACT DESIGN – Super compact designed, even smaller than a shoe box .Wall-mounted design frees up floor space for more storage, easy to install into washbasin and other tight spaces!
- ➤ EXCEPTIONALITY DURABLE – Instant hot water thanks to rapid and maintenance-free bare wire heating systems. High quality alloy bare heating element has good corrode resistance and acid-resisting,with longer lifespan, instantaneous heating efficiency up to 99%.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase & installation. Dimensions:7.6″ x 5.4″ x 2.6″
- Weight: 1.8 lbs
- Pipes fittings :1/2” NPT, Electrical requirements: 3.5 kW, 240 volts, Nominal pressure: 90PSI. Nominal current:20A. Required breakers:1x 2-POLE 25A. Required wire: 1 x 12 AWG . ( Breakers and wire are NOT included )
FEATURES –
◆ Saves Energy and Money
The Thermoflow Elex 3.5 electric tankless water heater is adopt to advanced technology of Germany.Changing to this Elex 3.5 means there are no standby losses. No need to preheat before using, the hot water will come out from the heater instantly after you turn on the water heater,you only need to stop it immediately after using,no any waste for water or electricity.
◆ Unlimited Hot Water
Instant hot water thanks to rapid and maintenance-free bare wire heating systems.Because a Thermoflow heats water only when it is used, and for as long as it is needed, there is an endless supply of hot water. Nobody runs out of hot water .
◆ Space Saving
A Thermoflow Elex 3.5 tankless water heater completely replaces a conventional tank heater, yet takes up considerably less space, saving valuable living space and providing endless hot water on demand.
◆ Two Options for Applications
The Elex3.5 model can be used for two different applications:Act as primary heater, just connect the inlet with cold water directly, and connect the outlet with mix tap; Act as booster heater, just connect the inlet with the outlet of storage tank,and connect the outlet with mix tap, more fast heating, higher flow rate, saving your time.
USING TIPS –
- The device must be filled with water before connection to the electrical supply!
- Make sure the min pressure of your water supply system reaches 7.3 PSI.
- Please read the instruction manual carefully before you install or using the water heater !
PACKAGE INCLUDES –
1X Thermoflow 3.5kW electric tankless water heater
1X plastic bracket
1X bag of installation accessories (2 gaskets,2 anchors,2 screws)
1X instruction manual
Inquiry & aftersales service: [email protected]
Hotline:＋1（844）334-4203
Flextrol FTT12 Thermal Expansion Tanks-for Hot Water Heaters, Carbon Shell, Stainless Steel 3/4 Inch MIP Connection, Butyl Diaphragm, 150 PSI, 210 Degrees Fahrenheit, Almond Color, 4.8 Gallons
- Thermal Expansion Tanks Are Used to Prevent Plumbing System And/or Water Heater Damage and Unnecessary Relief Valve Discharge Caused by Excessive Pressure from Thermal Expansion
- Prevent Dangerous Pressure Build Up & Protect Household Appliances and Fixtures
- External Baked Epoxy-Polyester Coating Provides a Durable Appliance Finish
- Exclusive Polypropylene Liner Eliminates Internal Corrosion
- Protect Safety Valves from Failing
- Save Energy and Water
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made in Italy
- All Tanks Are NSF61 Certified
What is Thermal Expansion?
When heated, water expands. Under normal circumstances, a 40 Gallons hot water heater creates roughly an additional half gallon of water when heated (with no demand). In the past this expanded water would flow back into the public water supply. However, in many countries, where applicable by code, a backflow preventer is required, creating a closed system and a new problem as this extra half gallon of water is not compressible. When an expansion tank is installed the excess water enters the pre-pressurized tank. As the temperature and pressure reaches its maximum, the diaphragm flexes against an air cushion (air is compressible) to allow for increased water expansion. When the system is opened again or the water cools, the water leaves the tank and returns to the system.
Potential Problems Without an Expansion Tank
- Premature failure of the water heater may void the warranty of the water heater
- Dangerous high pressure
- leaky fittings and valves
- collapsed center flues
- flames out of combustion chamber
- Unnecessary Relief Valve Discharge
Installation Options for Thermal Expansion Tanks
- Install on the cold water side after the pressure reducing valve and between the backflow preventer and the water heater
- Do not install in an area where leakage could cause property damage
- The tank can be installed either vertically or horizontally. However, if the tank is to be installed horizontally, then it must be fully supported independent from the piping. Failure to do so will void the warranty.
Technical Features
- All tanks are NSF61 Certified
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested
- 150 PSI Max pressure rating
- External baked epoxy-polyester coating provides a durable appliance finish
- Exclusive polypropylene liner eliminates internal corrosion
- Protected precharge valve eliminates potential leak path
Material Description
- Shell: Carbon Steel
- Connection: Stainless steel
- Diaphragm: Butyl
- Color: Almond
Operating Conditions
- Max. Operating Pressure: 150 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 40 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTT12
- Tank Size: 4.8 Gallons
- Tank Weight: 10 Pounds
- Connection Size (National Pipe Thread): 3/4" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 16" x 11" x 11"
- Acceptance Volume: 3.3 Gallons
- UPC Code: 80459513078
Similar items with 4 stars and above
Reliance 6 6 SOMS K 6 Gallon Compact Electric Water Heater
- Ideal for under counter or crawl space installation
- 6 gallon short, 6 year warranty, electric.
- Single 120 volt 1650 watt copper heating element.
- Side mounted cold water inlet and hot water outlet for easy installation.
- Factory installed Temperature and Pressure, T&P relief valve
Product Description
606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1″ foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.
From the Manufacturer
Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.
BoTaiDaHong Electrical Hot Water 2-Gallon Electric Tankless Instant Water Heater for Bathing Washingroom Shower Home Kitchen Bathroom 1500W/1.5KW 50HZ, IPX4 Water-Proof Level 110V 55℃- 70℃
- 【Energy Saving】It is a directly heating type with high efficiency and low power heating tube, which can take advantage of the thermal energy maximally. The temperature can be adjusted between 55℃-70℃ optionally, and the power will be off automatically when the set temperature is achieved.
- 【Fashionable&Space-saving】The small hot water tank can be placed in the space exquisitely.Can be installed in the kitchen, rest room, bathroom or any other places you want optionally.The mini hot water tank uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing.
- 【Application】Mini instant hot water heater suitable for kitchen rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation
- 【Feature】This is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families.can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.
- 【Shipment】We ship directly from the US warehouse.about 5-7 business days to delivery. If you have any questions or concerns, Feel free to contact us!
Product Description
Remember to fill the water for the initial installation.
The machine must be energized when it is out of the hot water tap.
Technical parameter：
Rated voltage: 110V 50HZ
Rated power: 1500W
Temperature adjustment scope: 55℃– 70℃
Minimum water pressure: 0.7MPa
Water-Proof level: IPX4
Including：
1x Body of water heater
1x Operation manual
It is a directly heating type with high efficiency and low power heating tube, which can take advantage of the thermal energy maximally. The temperature can be adjusted between 55℃-70℃ optionally, and the power will be off automatically when the set temperature is achieved. Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.
Conclusion
By our suggestions above, we hope that you can found 2 gallon hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
