justyoumarket 
Nowadays, there are so many products of 30mm cooling fan raspberry in the market and you are wondering to choose a best one. You have searched for 30mm cooling fan raspberry in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 30mm cooling fan raspberry which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m³/ h
- Number of revolutions: 13200RPM.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)
Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Current: 120 mA
– Speed: 5000RPM±15%
– Airflow: 1.79CFM
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.
Similar items with 4 stars and above
Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+
- ????Suitable for A Variety of Products: Pi fan, 30x30x7mm Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4 Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. This fan gives a smooth and quick working performance, which will provide you a perfect working space.
- ????Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Quickly dissipate heat for your Raspberry Pi or other experimental tools to and extend the lifespan of your Pi or other development boards.
- ????Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- ????Installation Screws Included: Don’t need to purchase screws by yourself. Screws Included. Fast installation in seconds. Intimate service, easy to install!
- ????Sleeve fan suitable for Raspberry Pi 4 and 3 B+. One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC), Compatible with other robotic projects and development boards
Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
SUNON Brushless Mini DC Cooling Fan 30mm x 30mm x15mm GM0503PHV2-8 3015 5V 0.4W
– Ultra quiet Low-speed brushless DC fan – Size: 30mm (L) x 30mm (W) x 15mm (H) – Material: High Quality Plastic Housing – 5 Plastic Blades – Speed: 7000 RPM – Airflow: 4.8CFM – Noise: 20 DBA – Rating: DC 5V , 0.4W; for Raspberry Pi 2/Pi 3 Case
AC Infinity MULTIFAN Mini, Compact 40mm x 20mm USB Fan for VR Gear, Aquarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation
- Compact and energy-efficient USB fan designed various DIY cooling and ventilation projects.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind electronics and on portable power banks.
- Dimensions: 1.6 x 1.6 x 0.8 in. | Airflow: 12 CFM | Noise: 18 dBA| Bearings: Dual Ball
Raspberry Pi Fan, BCZAMD Raspberry Pi DC 5V 3.5V Cooling Fan Brushless 2Pin Heatsink Cooler 30 x 30 x 7MM for RPi Zero/Zero W/Pi 2/Pi 3/3B+, for RetroFlag NESPI Case, Orange Pi 3D Printer Part, 4Pcs
- This cooling fan is for raspberry pi.
- You can choose 5v or 3.3v by connect different pins on raspberry pi.
- The raspberry pi cooling fan work almost noiseless in 3.3V, and with little sound in 5V.
- The wind power is stonger in 5V.
- Use for: Raspberry Pi 3 B+/3/2/B+, for NESPi Case, for Orange Pi or other robot project and development boards.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineers of technical team will always support you here.
After-sales guarantee:
each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specifications:
1. Size: 30 x 30 x 7 mm
2. Voltage: DC 3.3V 5V to choose
3. Current: 0.18A
4. Wire Length: 2.6 inches (66mm)
5. Connector: One-to-Two pin
Package includes:
4 x RPI Fan Cooling
Nuts M2.5, Screw M2.5 * 14mm not included!!!
Raspberry Pi 4 Fan, iUniker Raspberry Pi 4 Heatsink Fan Single Fan Cooling Fan and RAM Copper Heatsink for Raspberry Pi 4, Raspberry Pi 4B, Raspberry Pi 4 Model B
- Lower Cost than Dual Fan, Single Fan Version Heatsink Fan
- It Can Compatible with Many Single Board Computer (Just pay attention to the Size of the Heatsink)
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom 3M heat conductive strip can make sure your Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
SPECIFICATION:
– Size:
– Voltage: 5V
– Current: 0.2A
– Power: 1W
– Speed: 7500rpm
– Noise: 29DBA
Package include:
1x Single Cooling Heatsink Fan for CPU with Thermal Tape
3x Heatsinks with Thermal Tape
GDSTIME Raspberry Pi Cooling Fan, 30x30x7mm for Raspberry Pi 4 Model B, 3 B+, Pi 3, Pi 2, Pi 1 B+ Cooling
- Dimension of outer the frame is 30mm(L) x 30mm(W) x 7mm(H) / The size of fan in inch is 1.18in(L) x 1.18in(W) x 0.28in(H)
- The center to center distance beween the mountiong holes is 24±0.3mm/0.94in.
- Operating Voltage Range：4.5V to 5V. (overtake to 5V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Current: 0.1Amp
- Speed: 8500RPM
- Air flow: 2.65CFM
- Noise: 26dBA
- Connector: Dupont
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Package include:
1pcs fan include mounting screws & nuts
Dimensions: 30x30x7mm
Connector: Dupont
Rated Voltage: DC 5V
Rated Current: 0.1 Amp
Rated Speed: 8500 RPM
Air flow: 2.65 CFM
Noise: 26 dBA
Bearing Type: Sleeve Bearing
Life: 35000 hours at 25 degrees
Cable Lenght: 15cm or 5.9 inches
Weight: 7g or 0.25oz
Similar items with 4 stars and above
Dorhea 30x30x10mm 24V Fan DC Brushless Cooling Fan 3010 DC 24V for DIY 3D Printer Extruder Hotend V6 V5 CPU Arduino Humidifier 2Pin (4 PCS)
- High quality mini brushless 30 x 30 x 10mm DC 24V fan,3010 fan cooling cooler.
- DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.15A
- Noise: 24DBA
- Connecter: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 30mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
- Plastic construction 5 blade fan. Speed: 9000 + -10% RPM
- Wind Speed: 2.5M/S, Wind Volume: 2.8CFM
Specifications:
Size:30x30x10mm
Rated Voltage:DC24V
Speed: 10000RPM
Air flow: 3.95CFM
Noise:26dBA
Connector: PH2.0-2Pin
Life: 35000 hours
Package Include:
4 X 24V 2Pin DC Cooling Fan
Similar items with 4 stars and above
2Packs 30x30x10mm 30mm 5V Brushless DC Cooling Exhaust Fan
- 2 Piece fan and mounting screws & nuts
- Rated Voltage:5V 0.15A
- Speed: 9000RPM
- Air flow: 3.68CFM
- Noise:24dBA
- Connecter: PH2.0-2Pin
- Cable Length: 15cm Or 5.9 inche
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 30mm(L) x 30mm(W) x 10mm(H) / 1.18×1.18×0.39 in. per fan
Package include: 2 Piece fan and mounting screws & nuts
Size:30x30x10mm
Rated Voltage:5V 0.15A
Bearing type: Sleeve Bearing
Speed: 9000RPM
Air flow: 3.68CFM
Noise:24dBA
Connecter: PH2.0-2Pin
Cable Length: 15cm Or 5.9 inches
Life: 35000 hours
Weight:8g/pcs or 0.28oz
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found 30mm cooling fan raspberry for you.Please don’t forget to share your experience by comment in this post. Thank you!
