Best 3M 6900 Series Breathing Mask

The 3M Mold Remediation Respirator Kit 69097 includes one large sized 3M Full Face piece Reusable Respirator 6900 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Product Description

Use with 3M Filters 2000 Series, 3M Filter 7093 P100, 3M Cartridges 6000 Series, or 3M Dual Airline Systems against a variety of gases, vapours and particulate hazards according to NIOSH approvals. Reliable, convenient, compatible respiratory protection: The 3M Full Facepiece Reusable Respirator 6000 Series offers versatility for many envrionments and applications and helps provide respiratory protection against a wide variety of gases and vapors when used with approved catridges and filters. For use with 3M Cartridges 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvalsWhen properly fitted and used with approved 3M Cartridges and Filters, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH).

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

3M Tekk Protection 27 Pack Respirator Cool Valve Filtering Facepiece Particulate Respirator N95 Lightweight Comfortable “M” Nose Clip Recommended For Sanding & Preparation Before Painting NIOSH Approved: N95

Product Description

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M cartridge/filter 60923, organic vapor/acid gas/P100 when properly fitted on 3M half & full face pieces 6000 series and 3M half & full face pieces 7000 series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide or hydrogen fluoride & particulates at concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with full face pieces.

3M Construction Full Face Respirator Gray L 1 pc.

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

Full facepiece respirators may be used up to 50 OSHA PEL or applicable government standard, whatever us lower. If exposure levels are not known, a fresh air system is recommended. 3M recommended for spray painting laquer, enamel and pesticides. Reuseable design – changeable filters and cartridges affords eye and respiratory protection Includes: 1 reuseable facepiece, 2 organic vapor cartridges, 4 P95 filters, 2 filter retainers and 2 face sheild covers. Spray Paint Respirator – Organic Vapor is a medium, and fits 70% of the people, or people with a hat size smaller then 8 1/4, with a average face.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m 6900 series breathing mask, eg:

• What are Top 10 3m 6900 series breathing mask for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m 6900 series breathing mask to buy?
• What are Top Rated 3m 6900 series breathing mask to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 6900 series breathing mask?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 6900 series breathing mask.
• Before deciding to buy any 3m 6900 series breathing mask, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m 6900 series breathing mask and What you should consider when buying the 3m 6900 series breathing mask and Where to Buy or Purchase the 3m 6900 series breathing mask. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m 6900 series breathing mask of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 6900 series breathing mask.

Conclusion

By our suggestions above, we hope that you can found 3m 6900 series breathing mask for you.Please don’t forget to share your experience by comment in this post. Thank you!