Best 3M Cbrn Respirators

Product Description

3M Full Facepiece Reusable Respirator 6700/54145, Respiratory Protection, Small (Pack of 1)
CARE INSTRUCTIONS

1. Remove cartridges and filters.
2. Clean facepiece (excluding filters and cartridges) by immersing in warm cleaning solution, water temperature not to exceed 120º F (49º C), and scrub with soft brush until clean. Add neutral detergent if necessary. Do not use cleaners containing lanolin or other oils.
3. Disinfect facepiece by soaking in a solution of quaternary ammonia disinfectant or sodium hypochlorite (1 oz [30 ML] household bleach in 2 gallons [7.5 L] of water), or other disinfectant.
4. Rinse in fresh, warm water and air dry in noncontaminated atmosphere.
5. Respirator components must be inspected prior to each use. A respirator with any damaged or deteriorated components must be repaired or discarded.
6. The cleaned respirator should be stored away from contaminated areas when not in use.

WARNING
Do not clean with solvents. Cleaning with solvents may degrade some respirator components and reduce respirator effectiveness. Inspect all respirator components before each use to ensure good operating condition. Failure to do so may result in sickness or death.

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	Multi Gas Vapor Cartridge/Filter P100	Organic Vapor/Acid Gas Cartridge/Filter P100	Acid Gas Cartridge/Filter P100	Acid Gas Cartridge	Ammonia Methylamine Organic Vapor Cartridge/Filter P100	Formaldehyde Organic Vapor Cartridge/Filter P100	Mercury Vapor Chlorine Gas Cartridge/Filter P100	Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

The 3M Mold Remediation Respirator Kit 69097 includes one large sized 3M Full Face piece Reusable Respirator 6900 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

The M40A1 Field Protective Gas Mask has been in use by the military of the United States since 1992 to protect from field concentrations of chemical and biological agents, along with radiological fallout particles. It still remains in U.S. Military service today.

Old stock that was issued but not used. Size medium. No filters, bag or second skin included. Just the basic gas mask. See my photos for what you will receive.

From the Manufacturer

Full facepiece respirators may be used up to 50 OSHA PEL or applicable government standard, whatever us lower. If exposure levels are not known, a fresh air system is recommended. 3M recommended for spray painting laquer, enamel and pesticides. Reuseable design – changeable filters and cartridges affords eye and respiratory protection Includes: 1 reuseable facepiece, 2 organic vapor cartridges, 4 P95 filters, 2 filter retainers and 2 face sheild covers. Spray Paint Respirator – Organic Vapor is a medium, and fits 70% of the people, or people with a hat size smaller then 8 1/4, with a average face.

Use with 3M Filters 2000 Series, 3M Cartridges 6000 Series, 3M Cartridges and Filters 7000 Series and powered and supplied air systems against a variety of gases, vapors and particulates according to NIOSH approvals.

Product Description

Keep Your 3M Protection Professional Multipurpose Respirator Working Safely By Replacing Its Cartridges Regularly. New Cartridges Will Continue To Protect Your Lungs From Mold, Lead And Dangerous Airborne Sprays From Coatings And Sealants. Filters Up To 99.7% Of Airborne Particles. Made In Usa.Technical Details: Niosh Approved For Use Against Certain Organic Vapors Like Chlorine, Hydrogen Chloride, Sulfer Dioxide, Hydrogen Flouride, Hydrogen Sulfide, And Particulates Protects Your Lungs From Particles Related To Mold, Lead, Coatings, Solvents, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride Or Hydrogen Sulfide Delivers At Least 99.7 Percent Filtration Efficiency Against Particles (Including Oil) Low Profile Cartridges Won’T Obscure Your Vision Made In Usabest Used With: 3M Protection Professional Multipurpose Respirator (#43258). Note: Packaging may vary.

From the Manufacturer

3M Reusable Dual Cartridge Respirators are designed and constructed for exceptional performance and comfort that lasts. The face-pieces are designed to provide outstanding comfort and fit. The sweptback cartridges improve visibility and the face-pieces can be easily disassembled for cleaning. They are NIOSH approved.

Product Description

OSHA has issued a final rule (March 2016, OSHA Respirable Crystalline Silica in Construction Regulations – 29 CFR 1926.1153) for America’s workers, limiting their exposure to respirable crystalline silica, a substance OSHA has stated can increase the risk of developing silicosis, lung cancer and kidney disease. 3M has resources and PPE to help you as you work to meet the new exposure limit and help protect your crew.

From the Manufacturer

The 3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series helps provide respiratory protection in harsh, dirty environments against airborne contaminants when used with approved 3M cartridges and filters. This facepiece combines comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and taking it off while moving in and out of contaminated areas. The quick latch also eliminates the need to remove a hardhat or faceshield when lowering or raising the respirator. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments.

The facepiece offers numerous other comfort features. Two innovative design features have been built in: a special valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow Valve that helps to make breathing easier by reducing heat and moisture. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M bayonet-style filters and cartridges, including 6000 Series Cartridges and 3M 2000, 2200, 7000 or 5000 Series Filters, to help provide respiratory protection against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required.

A durable, long-lasting respirator, the 6500 Series facepiece is rugged enough to help withstand extreme conditions and long hours, yet comfortable to wear. The proprietary quick latch design offers allows the wearer to easily put the facepiece on and off. The sleek, low-profile design helps to give a worker a wide field of view that better suits compact work spaces and close proximity to coworkers. The overmolded design offers simplified cleaning and maintenance with fewer parts and crevices where dirt can hide.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Rugged Comfort Half Facepiece Reusable Respirator 6500 Series helps reduce exposure to many contaminants when properly fitted and used with approved 3M cartridges and filters.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m cbrn respirators, eg:

• What are Top 10 3m cbrn respirators for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m cbrn respirators to buy?
• What are Top Rated 3m cbrn respirators to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m cbrn respirators?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m cbrn respirators.
• Before deciding to buy any 3m cbrn respirators, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m cbrn respirators and What you should consider when buying the 3m cbrn respirators and Where to Buy or Purchase the 3m cbrn respirators. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m cbrn respirators of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m cbrn respirators.

Conclusion

By our suggestions above, we hope that you can found 3m cbrn respirators for you.Please don’t forget to share your experience by comment in this post. Thank you!