Which Is The Best Water Cooling Block Quick Disconnect

EK-QDC is a Quick Disconnect Coupling (QDC), a special connector fitting that allows quick and tool-less expansion of any custom loop. Quick Disconnect is a medical grade product with a patent pending Zero Drop design, and is produced by CPC, the leading provider of quick disconnect couplings! EK-QDC is made out of male and female part, with 10mm barb fitting on both ends. The locking mechanism can be released by pressing the button on the female part. This action stops the flow of liquid through the coupling and you are safe to keep it disconnected.

Every EK-QDC comes with four black Ezyclik Nylon Hose Clamps. The Ezyclik Nylon Hose Clamp is specifically designed for applications where space is restricted. The unique design of the patented Ezyclik-P ensures strong, fast and reliable fitting. Two enclosed clamps are designed to be used with 10/13 mm tubing and two additional clamps are designed to be used with 10/16mm tubing. Tubes with larger ID (inner diameter) and OD (outer diameter) will not work with this QDC!

When the QDC is opened (or disconnected) the liquid will not flow through it, so you can not use it as a drain port! In order to use it as a drain port, the QDC must be connected. Keep this in mind when planning your loop!

Enclosed:
– Female QDC adapter (NS4D17006)
– Male QDC adapter (NS4D22006)
– 15,9mm clamp (2pcs)
– 13,2mm clamp (2pcs)

PLEASE NOTE:

This product can not be used with hard tubing!
Only use this product with tubing that has the inner diameter (ID) of 10mm (3/8″). Do not use 12/16mm or 13/19mm tubing!
This product can not serve as the drain port because no liquid passes through when the coupling is disconnected! If you want to use it as a drain port, the QDC must be connected. Keep this in mind when planning your loop!
Do not use more than four (4) sets of QDC’s in a typical custom loop system (with two water blocks and two radiators).

Bitspower Quick-Disconnect fitting for easy and convenient component detachment. Model: BP-MBQDFRCPF-CC5U.

Koolance patented quick disconnect no-spill coupling with automatic shutoff. 10mm (3/8in) ID, 16mm (5/8in) OD female straight connection with compression fitting. It will only fit a Koolance QD3 male quick disconnect.

After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi).

Additional Specifications

• Materials: Brass, Stainless Steel, EPDM
• Max Temperature: 100°C (212°F)
• Max Pressure @ 25°C: 8kgf/cm2 (113.8psi)

OTC’s No. 7937 GM Transmission Oil Cooler Line Disconnect Tool is specially designed for one handed operation in tight spaces. Simply snap the tool over a 1/2 inch diameter line – with slots facing the fitting – then squeeze and insert the tool, rotating it until it engages the fitting – a 1/4 turn releases the line. Designed specifically for use on GM 2WD and 4WD trucks and vans equipped with 4L60E (1993-2012) or 4L80E (1991-2013) transmissions but also works without modification on many other front or rear wheel drive GM vehicles with at least a 1-1/4 inch clearance between the radiator/transmission and the first bend in the line. This time saving tool eliminates the need to struggle with screwdrivers or picks to release these unique GM lines. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
2 X CPU Water Cooling Block

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
1 X CPU Water Cooling Block

Conclusion

By our suggestions above, we hope that you can found water cooling block quick disconnect for you.Please don’t forget to share your experience by comment in this post. Thank you!