justyoumarket 
Nowadays, there are so many products of 134a refrigerant refrigerator in the market and you are wondering to choose a best one. You have searched for 134a refrigerant refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 134a refrigerant refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
ZeroR R-134a Refrigerant – Made in USA – 12oz Cans (3)
- USA – Purchasing USA made refrigerants guarantee purity standards that will keep your A/C working for long time.
- BRAND – The brand and label shipped when purchased could vary but will always meet the same quality standards.
- NON SSV CANS – These cans are NOT equipped with the self sealing valve (SSV). This means you can used your common R-134a piercing style can taps.
- DiY PARTS DIFFERENCE – Have questions? Reach out to our ASE Certified technical support staff! Genuine R-134a refrigerant that is Made in the USA to meet purity standards.
Supco BPV31 Bullet Piercing Valve
Product Description
The only valve with a permanent type, patented gasket application Creates a permanent, leak-proof seal that will withstand any pressure and temperature for the life of the unit Furnished with adapter sleeves for multiple use application Hex key included No tools required 1/4″ male flare outlet.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Supco BPV31 Bullet Piercing Valve
Enviro-Safe 3226 Can Tap with Gauge – R-134a can to R-12/R-22 port
This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection. It was made for EnviroSafe cans which have an R-134a thread and allows you to install directly to R12 and R22 systems. Centrally installed is an easy to read pressure gauge. 20″ long hose 1/4″ end end fits R12, 22, 502 fittings Gauge has scale readings for R134, R12, & 22 Use for household with aerosol style cans. This gauge does not have a shut-off. The T-handle is a piercing device only.
3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56
- Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters
- R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning
- BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure
- Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, suitable for R134A refrigerant of vehicle or home air-conditioning. 2019-10-11：
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, the R134a can tap is only suitable for R134A refrigerant of
vehicle or home air-conditioning.
BPV31 bullet piercing tap valve:
It can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Specifications:
Charging hose:
Size: approx. 59 inch/ 149.8 cm in length
Maximum pressure value: 200 PSI
Bullet piercing tap valve:
Material: metal
Color: silver
Package includes:
1 x R134A refrigerant charging hose
2 x BPV31 bullet piercing tap valve kit
Warm notice:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
This is not original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility, not work as brands.
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Aupoko A/C R-134A Refrigerant Recharging Hose Kit – with 1/2’’ Acme Male 1/4" SAE Female Can Tap Valve, R134A Quick Couple, Low Pressure Gauge and 59” Recharge Hose – 1 Year Warranty
- 【WIDE COMPATIBILITY】 The air conditioning refrigerant charging hose kit with gauge fits for R134A refrigerant to vehicle or home air-conditioning.
- 【PREMIUM QUALITY】 The R-1234A A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
- 【EASY INSTALLATION】 Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
- 【DIMENSION】Auto 1/2 ACME LH AC refrigerant can opener tap dispensing valve, 59’’ charging hose, 200 PSI pressure gauge, and R134A Low side adapter.
- 【1 – YEAR WARRANTY】The AC R134A charging hose kit has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time.
R134a Charging Hose to Refrigerator, Can Tap with Gauge – R-134a can to R-12/R-22 port
- The length of hose is 19″. Only used for Home Refrigerator adding refrigerant
- Easy and convenient to use. Come with gauge for easily viewing during use
- R-134a can be connected to the R-12 / R-22 service port for easy conversion
- Gauge has three scale readings of R134, R12 and R22 for your convenience
- Excellent appearance and performance. We believe that you will be satisfied
Interdynamics Certified A/C Pro R-12 to R-134a Retrofit Valve 7/16" Low Side Port
Aupoko R-134A AC Refrigerant Can Opener Tap Dispensing Valve 1/2 Acme Thread Brass (R134A Recharge Hose/w Gauge)
- High quality R134A refrigerant Charge Hose with Gauge with strong construction.
- Completed with R-134A AC Refrigerant Can Opener Tap Dispensing Valve, 1/2 ACME Thread Brass adapter.
- 90-degree Push & Lock coupler with auto shut off.
- For use in adding R134A refrigerant to vehicle or home air-conditioning with highly working performance.
- Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
Features
High quality R134A refrigerant Charge Hose with Gauge with strong construction.
Completed with R-134A AC Refrigerant Can Opener Tap Dispensing Valve, 1/2 ACME Thread Brass adapter.
90-degree Push & Lock coupler with auto shut off.
For use in adding R134A refrigerant to vehicle or home air-conditioning with highly working performance.
Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge
Specifications:
– Material: Brass and Rubber
– Overall length: 385mm/15.2inch.
– Can Opener Thread: 1/2″ ACME
– Quick Coupler: R134A Low Pressure (Inner Diameter 13mm).
Package Includes
1Pc R134A Air Conditioning Refrigerant Charging Hose with Gauge.
BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
- BPV31 Piercing Valve for Bullet with R134a refrigerant recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit).
- R134a refrigerant charge hose with gauge: 19″ hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4″ end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port.
- BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4″, 5/16″ and 3/8″. The valve is not created or sold by Bullet.
- The hose is made of corrosion-resistant brass, won’t wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. But valve of other sellers with no gasket, it will leaks and can not fix for a fridge, not freezing properly.Our replacement hose kit has been well-tested by the manufacturer.
- Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a.
Conclusion
By our suggestions above, we hope that you can found 134a refrigerant refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
