justyoumarket 
Nowadays, there are so many products of state hot water tanks in the market and you are wondering to choose a best one. You have searched for state hot water tanks in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings state hot water tanks which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Camco 02722/02723 4500W 240V Screw-In Foldback Water Heater Element Duron Style – Low Watt Density
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8″ thread and is made for State Industries manufactured Duron Tank Water Heaters. Also used in Sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Reliance Water Heater Pilot Assembly 100109295 9003542005 Replacement Part Natural Gas Compatible with Reliance, A.O. Smith, and State Branded Tanks
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing Natural Gas
- NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE
- STANDARD 24″ LENGTH
- FITS MANY BUT NOT ALL WATER HEATERS ON THE MARKET.
- SYSTEM MUST BE CHECKED FOR LEAKS BEFORE OPERATION
- WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE STANDARD 24″ LENGTH FITS MANY WATER HEATERS ON THE MARKET WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT The 113884-01 Fits Desa, Reddy, All-Pro, Universal, NR, Sears, Remington and many other Propane Forced Air Heaters Fit Models: RLP55V, RLP125V, REM55PV, REM125PV, 85-FAC, 125-F, TB115, SPC-85, SPC125, BLP55V, WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Denshine 50L/13 Gallon Electric Hot Water Heater Tank Water Heater for Bathroom Kitchen (Faucet Quick Heating Tap Shower) -US Shipping, 3-6D Delivery
- ????【FULL-AUTOMATIC CONTROL】Automatically adding cold water, automatically heating and automatic temperature control.
- ????【FOUR SAFETY PROTECTIONS】Multiple safety protection devices for boil dry protection over-temperature protection, electric leakage protection and high hydraulic pressure protection to ensure safety and reliability
- ????【SPECIAL-PURPOSE SEWAGE OUTFALL】Simple liner cleaning, time-saving and labour-saving. Liner anode protector is mounted at sewage outfall to facilitate checking and replacing anode protection materials.
- ????【CERAMIC DESIGN】Ceramic liner, anti-rust, anti-corrosion, anti-scale, anti-leakage to extend service life. Simple appearance and firm structure.
- ????【THICKENING OF THE OVERALL POLYURETHANCE FOAM】good temperature control effect and energy and power saving Pre-thermostat knob and indication light: easy to operation and clear state
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
U.S. Solid Anode Rod- 9" Long Magnesium Anode Rod for Hot Water Heaters,3/4" NPT Thread Prevent Corrosion Within Your Water Heater, Sacrificial Anode Rod for Suburban Hot Water Heaters, a Product
- CHECKING YOUR ANODE ROD: The anode rod should be removed from the water heater’s tank annually for inspection and replaced when more than 6” of core wire is exposed at either end of the rod
- MAGNESIUM: Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank
- WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water
- The inside of water heaters are coated with porcelain to prevent the steel from being exposed to water
- There are always small cracks in the porcelain that can allow water to meet with steel
- LIFESPAN: The anode rod is corroding faster than the steel in the tank
- You should replace your anode rod every 3 to 5 years so the life of your hot water tank isn’t shortened
- SATISFACTION GUARANTEED: All U.S. Solid products come with a 1 year satisfaction guarantee
- If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you
Most water heater tanks are steel with a thin porcelain lining to protect the metal from corrosion. Since the lining eventually cracks, tanks have a second line of defense against rust, a long metal anode rod that attracts corrosive elements in the water. Water is naturally corrosive and becomes even more corrosive when it is heated. Protect your water heater from rust with the U.S. Solid Anode Rod, which is threaded to match all suburban model water heaters.
An anode rod also known in the industry as the “sacrificial lamb” is made of magnesium. Due to the position of magnesium to steel in the electromotive series of metals, the magnesium will corrode, producing an abundance of electrons which flow to the exposed steel surface and maintaining it in the electro-negative state. As current flow takes place, the anode rod reacts chemically to corrode at a rate faster than the steel inner tank. In less technical terms, the magnesium anode rod will corrode faster than the steel hot water tank. The anode rod corrodes faster than the steel in the tank, prolonging the life of your hot water heater.
About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
Fluidmaster B1H18 Water Heater Connector, Braided Stainless Steel – 3/4 Female Iron Pipe x 3/4 Female Iron Pipe, 18-Inch Length
Product Description
Protect your home with a Fluidmaster Braided Stainless Steel Water Heater Connector. This 3/4-Inch female iron pipe by 3/4-Inch female iron pipe connector connects your water heater to the water supply. Made from high quality PVC and braided in stainless steel, this connector won’t burst or leak in even the highest pressure conditions.
From the Manufacturer
Protect your home with a Fluidmaster Braided Stainless Steel Water Heater Connector. This 3/4-Inch female iron pipe by 3/4-Inch female iron pipe connector connects your water heater to the water supply. Made from high quality PVC and braided in stainless steel, this connector won’t burst or leak in even the highest pressure conditions.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found state hot water tanks for you.Please don’t forget to share your experience by comment in this post. Thank you!
