Top 10 Dewalt 500 Lb Capacity Ladder

Product Description

Stepladder, Material Fiberglass, ANSI Type IAA, Ladder Height 4 ft. , Load Capacity 375 lb. , Number of Steps 3, Base Spread 28-7/8 In. , Bottom Width 19-5/8 In. , Step Depth 3 In. , Step Tread Ribbed, Series FS1400HD, Includes Molded Top

From the Manufacturer

A 4-foot extra heavy duty Fiberglass Stepladder with a 375 lbs capacity. This ladder includes a full Metal Boot – Aluminum angle feet with thick slip resistant rubber tread. Reinforcement plates wrap around the rail for unsurpassed durability. Double-Rivet Step Construction – Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. 30% greater shear strength than solid aluminum rivets. Heavy Duty Reinforcement Plates – Reinforcement plates wrap around the rail at spreader brace and shoe assembly connections for unsurpassed durability. Molded Top With Recessed Tray – Nonconductive structural molded top provides greater impact resistance and durability than aluminum tops. Large parts tray recessed 1/4-inch deep with tool slots. New 375 lb. Rated Safety Yellow Rail – Nonconductive full channel rails are covered with a polyester veil for years of service without fiber prominence or blooming. Extra Heavy Duty Inside Spreader Braces – Extra thick spreader braces located inside of fiberglass rails help protect braces from getting hooked or abused in transit. Heavy Double Gusset Bracing – Heavy duty steel gussets on each step and angle back brace.

Product Description

Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3″ wide.

From the Manufacturer

Louisville Ladder Premium Step ladders are ideal for low and medium height jobs. These steps are able to hold up to 300 pounds. Every stepladder has grooved steps to provide maximum traction. In addition, every step has a double rivet construction. A Louisville step Ladder is great for both professionals and DIY’ers. Every stepladder meets the standards set by the ANSI and OSHA, so you can feel reassured knowing your Louisville ladder is safe for your whole family to use. Louisville ladders are great for all of the construction and paint trades as well as any household task.

Product Description

DeWalt DEXL2010-02 2 foot industrial aluminum step stand, With wider steps, slip resistant shoes and heavy duty molded top.

From the Manufacturer

DeWalt DEXL2010-02 2 foot industrial aluminum step stand, With wider steps, slip resistant shoes and heavy duty molded top.

Product Description

At first glance, the 3-foot Little Giant MicroBurst looks like a traditional A-frame stepladder, but there is nothing traditional about it. The MicroBursts unique pivoting top cap and patent-pending Stable Lock spreader system fundamentally changes the standard stepladder model. As the top cap pivots, the MicroBursts rails fit neatly inside each other, creating a slim, 3½-inch storage and carrying profile. The MicroBurst stores in nearly half the space and is much more stable than a comparable type IAA (375 lbs.) stepladder. The MicroBursts Stable Lock spreader system locks securely in place, creating a solid A-frame structure with no room for shifting or walking. On typical A-frame stepladders, the spreader bars are the most important, yet weakest part of the ladder. On the Little Giant MicroBurst, the spreader system is the strongest part of the ladder, constructed of a high-strength steel alloy. Also, unlike most A-frame ladders, the MicroBursts patent-pending design makes room for a wide flare on both sides of the ladder, significantly increasing lateral stability. Its easier to carry, store and set-up; its stronger and safer than any other comparable A-frame ladder.

From the Manufacturer

At first glance, the 3-foot Little Giant MicroBurst™ looks like a traditional A-frame stepladder, but there is nothing traditional about it. The MicroBurst’s unique pivoting top cap and patent-pending Stable Lock™ spreader system fundamentally changes the standard stepladder model. As the top cap pivots, the MicroBurst’s rails fit neatly inside each other, creating a slim, 3½-inch storage and carrying profile. The MicroBurst stores in nearly half the space and is much more stable than a comparable type IAA (375 lbs.) stepladder. The MicroBurst’s Stable Lock spreader system locks securely in place, creating a solid A-frame structure with no room for shifting or walking. On typical A-frame stepladders, the spreader bars are the most important, yet weakest part of the ladder. On the Little Giant MicroBurst, the spreader system is the strongest part of the ladder, constructed of a high-strength steel alloy. Also, unlike most A-frame ladders, the MicroBurst’s patent-pending design makes room for a wide flare on both sides of the ladder, significantly increasing lateral stability. It’s easier to carry, store, and set-up; it’s stronger and safer than any other comparable A-frame ladder.

From the Manufacturer

Brute 375 FM1408HD 8-ft Extra Heavy Duty Fiberglass Twin Front Ladder 375 lbs rated. Crafted with durable parts and designed for climbing from either side. Designed to meet the most demanding industrial/contractor applications. Riveted Step Construction with Gussets – Each step features heavy duty steel gussets secured with large-headed, semi-tubular steel rivets for maximum strength. 30% greater shear strength than solid aluminum rivets. Heavy Duty Gusset Bracing – Heavy duty steel gussets on each step provide maximum strength and stability. Spreader Brace Reinforcement Plates – Four key stress areas are reinforced with aluminum plates to prolong ladder life. Heavy Gauge Steel Hinges – Heavy duty hinge assembly design for maximum durability. Inside Spreader Braces – Extra thick spreader braces located inside of side rails help protect braces from getting hooked or abused in transit. New 375 lb. Rated Rail – Nonconductive full channel rails are covered with a polyester veil for years of service without fiber prominence or blooming.

Product Description

Stepladder, Material Fiberglass, ANSI Type IA, Ladder Height 4 foott, load capacity 300 pounds. Number of Steps 3, Base Spread 28-3/16 inch, Bottom Width 18-13/16 inch, Step Depth 3 inch, Step Tread Ribbed, Series L-3016.

From the Manufacturer

A 4-foot fiberglass step ladder with a 300 pound capacity for great value Molded top with parts tray, molded top provides exceptional stiffness and rigidity. In addition, the top has a recessed parts tray and tool slots. Pinch resistant spreader braces, heavy duty plated steel spreader braces with double rivet hinge protect user from pinched fingers. Slip resistant rubber feet, aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary. Side rails, fiberglass side rails are full channel on the front and back legs.

Product Description

8′, fiberglass, type iaa, heavy duty step ladder, 375 LB duty rating, full channel non-conductive fiberglass rail, heavy gauge metal tool top, inside spreader braces, slip resistant rubber feet, meets osha, CSA, & ANSI standards, double-rivet step construction, heavy gusset bracing.

From the Manufacturer

A 8-foot extra heavy duty fiberglass stepladder with a 375 pound capacity. This ladder includes aluminum angle slip-resistant rubber feet to provide grip on ground surfaces. Double rivet step construction, each step secured with six large headed, semi-tubular steel rivets for maximum strength. Thirty percent greater shear strength than solid aluminum rivets. Inside spreader braces, help protect braces from breaking. Heavy duty gusset bracing also provides extra protection and support on each step.

Product Description

This 8 foot fiberglass ladder has a Type IA duty rating with load capacity of 300 pounds. This ladder combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder’s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Other features include Louisville Ladder’s patented SHOX impact absorption system, new Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. The new Louisville FXS1508 Fiberglass Cross-Step ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.

From the Manufacturer

This innovative fiberglass ladder has a type IA duty rating with load capacity of 300 pounds. The FXS1500 Cross-Step ladder combines the shelf and step ladder for a 2 in 1 combination and was designed to accommodate multiple placement locations. The shelf design and its unique Pro top improve worker productivity. The design angles of the cross-step ladder give the professional contractor or even DIY person closer to his work area. Other features include Louisville Ladder patented Shox impact absorption system, new raptor boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. The new Louisville FXS1506 fiberglass cross-step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

Product Description

Stepladder, Material Fiberglass, ANSI Type I, Ladder Height 8 ft. , Load Capacity 250 lb. , Number of Steps 7, Base Spread 52 In. , Bottom Width 24-7/8 In. , Step Depth 3 In. , Step Tread Ribbed, Series FS2000, Includes Molded Top for Tools

From the Manufacturer

Louisville Ladder eight foot medium duty fiberglass stepladder, with a 250 pound work capacity. Now features Louisville exclusive “Pro Top” designed with innovative features to improve the user’s performance when working electrical, and residential jobs. Pro top includes a magnet tray, hardware tray, curved ergonomic front, drill and tool slots, paint bucket holder, and a pipe or 2×4 holder to increase productivity and extreme durability. Also has pinch resistant spreader braces, slip resistant rubber feet, and double-rivet step construction, secured with six large headed, semi-tubular steel rivets for maximum strength. 30-Percent greater shear strength than solid aluminum rivets, to increase user safety.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt 500 Lb Capacity Ladder, eg:

• What are Top 10 Dewalt 500 Lb Capacity Ladder for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt 500 Lb Capacity Ladder to buy?
• What are Top Rated Dewalt 500 Lb Capacity Ladder to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt 500 Lb Capacity Ladder?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt 500 Lb Capacity Ladder.
• Before deciding to buy any Dewalt 500 Lb Capacity Ladder, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt 500 Lb Capacity Ladder and What you should consider when buying the Dewalt 500 Lb Capacity Ladder and Where to Buy or Purchase the Dewalt 500 Lb Capacity Ladder. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt 500 Lb Capacity Ladder of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt 500 Lb Capacity Ladder.