justyoumarket Nowadays, there are so many products of bobrick b-6806 in the market and you are wondering to choose a best one.You have searched for bobrick b-6806 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings bobrick b-6806 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
917 reviews analysed
Bobrick 6806.99×36 304 Stainless Steel Straight Grab Bar with Concealed Mounting Snap Flange, Peened Gripping Surface Satin Finish, 1-1/2" Diameter x 36" Length
Bobrick 6806.99×18 304 Stainless Steel Straight Grab Bar with Concealed Mounting Snap Flange, Peened Gripping Surface Satin Finish, 1-1/2" Diameter x 18" Length
- Grab bar shall be type 304 stainless steel with satin-finish
- Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2″ (38mm) outside diameter
- Clearance between the grab bar and wall shall be 1-1/2″ (38mm)
- Concealed mounting flanges shall be 1/8″ (3mm) thick stainless steel plate, 2″ by 3-1/8″ (50 x 80mm), and equipped with two screw holes for attachment to wall
- Measures 1-1/2″ diameter by 18″ length
Grab bar shall be type 304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2″ (38mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2″ (38mm). Concealed mounting flanges shall be 1/8″ (3mm) thick stainless steel plate, 2″ by 3-1/8″ (50 by 80mm), and equipped with two screw holes for attachment to wall. Flange covers shall be 22 gauge (0.8mm), 3-1/4″ (85mm) diameter by 1/2″ (13mm) deep, and shall snap over mounting flange to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with barrier-free accessibility guidelines (including ADAAG in the USA) for structural strength. Measures 1-1/2″ diameter by 18″ length.
Bobrick B-6806×18 Concealed Mounting Grab Bar with Snap Flange, Satin
Product description
6806×18 Grab Bar Size: 18″ Features: -Bar passes through flange and is heliarc welded to form single structural unit. -Cover snaps over mounting flange to conceal screws. -Grab bars that provide 1.5” clearance from the wall can support loads in excess of 900 pounds when properly installed. -All joints and supports are contour cut and welded. -Peened nonslip gripping surface available. -Concealed anchors and fasteners available as an optional accessory. Product Type: -Grab bar. Weight Capacity: -900 Pounds. Dimensions: -Concealed anchors: 2” W x 3.125” H . -Plate thick: 0.125”. -Satin-finish 18-gauge type 304 Stainless Steel tubing 1.5” diameter. -Cover is 22-gauge (0.8mm) Stainless Steel with Satin-finish. Grab Bar Size 12″ – Overall Width – Side to Side: -12″. Grab Bar Size 18″ – Overall Width – Side to Side: -18″. Grab Bar Size 24″ – Overall Width – Side to Side: -24″. Grab Bar Size 30″ – Overall Width – Side to Side: -30″. Grab Bar Size 36″ – Overall Height – Top to Bottom: -3.25″. Specifications: ADA Compliant: -Yes.
From the Manufacturer
Grab bar and concealed mounting plates shall be constructed of type-304 stainless steel with satin finish
Bobrick 5806×18 304 Stainless Steel Straight Grab Bar with Concealed Mounting and Snap Flange, Satin Finish, 1-1/4" Diameter x 18" Length
- Straight grab bar
- Satin finish
- Concealed mounting flange 1/8″ (3mm) thick, type 304 stainless steel plate, 2″ width by 3-1/8″ height (50 by 80mm), with screw holes for concealed anchors
- Cover snaps over mounting flange to conceal screws
- Measures 1-1/4″ diameter by 18″ length
- 18 Gauge Stainless Steel
- 304 Series Stainless Steel tubing
- Bar passes through flange and is heliarc welded
- Cover snaps over mounting flange to conceal screws
- Flange is 1/8-Inch thick
Bobrick 367-60 ClassicSeries Interchangeable Waste Receptacle, 12 Gallon Capacity
Interchangeable 12 gallon waste receptacle module designed for changing traffic and usage needs. 1 year warranty.
Bobrick 369 ClassicSeries 304 Stainless Steel Recessed Paper Towel Dispenser and Waste Receptacle, Satin Finish, 2 Gallon Capacity, 14" Width x 28" Height
Bobrick 2111 ClassicSeries Surface-Mounted Soap Dispenser, 40oz, Stainless Steel
- Corrosion resistant valve dispenses commercially marketed all-purpose hand soaps
- Vertical tank is satin finish stainless steel
- soap refill window
- Concealed wall fastening
- hinged filler top requires special key to open
- Vandal resistant
- Valve operates with less than 5 lbs of force (22.2 N)
- Corrosion-Resistant
- Dispenes commercially marketed all-purpose hand soaps
- 40 fluid ounce Capacity
- Vandal-Resistant
- Valve operates with less than 5 lbs. of force
Product Description
Surface mounted soap dispenser shall be type-304 stainless steel with satin-finish. Corrosion-resistant valve shall dispense commercially marketed all-purpose hand soaps. To prevent corrosion of the tank, use only chloride-free pH-neutral liquid soaps. Valve shall be operable with one hand and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.). Container shall be equipped with a clear acrylic refill-indicator window; a locked, hinged stainless steel lid for top filling; and shall have a capacity of 40- fl oz (1.2L). Unit shall have concealed, vandal-resistant mounting. Vertical tank is satin-finish stainless steel. Valve dispenses all-purpose hand soaps. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal resistant. Measures 4-3/4″ width by 8-1/8″ height. Wall to push-button, 3-1/2″ (90mm).
From the Manufacturer
Surface-mounted soap dispenser shall be constructed of type-304 stainless steel with satin finish.
Bobrick Washroom Equipment B-262 Bobrick 262 Surface-Mounted Paper Towel Dispenser, 10 3/4 x 4 x 14, Satin Stainless Steel
- Satin-finish stainless steel
- Cabinet slots indicate refill time
- Door has tumbler lock and piano-hinge
- 67 Percent post-consumer content
- 100 Percent total recovered content
- Dispenses 400 C-Fold or 525 multifold towels (3 1/8-Inch to 3 13/16-Inch) without adjustments or adapters
- Door has knob latch and piano-hinge
- Cabinet slots indicate refill time
- May order TowelMate Accessory(Part# 262-130) to dispense multifold paper towels measuring 2-1/2-Inch to 3-3/16-Inch deep, one at a time
- Satin Finish
Bobrick 273103 Theft Resistant Spindle for ClassicSeries Toilet Tissue Dispensers (3)
- Replacement spindle for your Bobrick toilet tissue dispenser
- Heavy-duty cast aluminum, satin-finish
- High-impact plastic spindles have concealed locking device
- theft-resistant
- Holds single roll up to 6″ (150mm) dia. (2000 sheets)
- Works with the following model numbers: b-273, b-2730, b-274, b-2740, b-27460, b-3746, b-27466
Bobrick 273103 Theft Resistant Spindle for ClassicSeries Toilet Tissue Dispensers
Bobrick B-2621 3-1/8" – 3-13/16" Depth, Stainless Steel Classic Series Surface-Mounted Paper Towel Dispenser
- Satin-finish stainless steel
- Dispenses 200 C-fold or 275 multifold towels measuring 3-1/8″ to 3-13/16″ deep without adjustment or adapters
- Door has knob latch and piano-hinge
- Dispenses 200 C-Fold or 275 multifold towels (3 1/8-Inch to 3 13/16-Inch) without adjustments or adapters
- Door has knob latch and piano-hinge
- May order TowelMate Accessory(Part# 262-130) to dispense multifold paper towels measuring 2-1/2-Inch to 3-3/16-Inch deep, one at a time
- Stainless Steel Construction
- Classic Series
Product Description
Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a knob latch. Paper towel tray shall have hemmed opening to dispense paper towels without tearing. Unit shall be capable of dispensing 200 C-fold or 275 multifold paper towel. Measures 10-3/4″ Width by 7-1/8 height by 4″ depth.
From the Manufacturer
Surface-mounted paper towel dispenser shall be constructed of 22-gauge, type-304 stainless steel with satin finish.
Conclusion
By our suggestions above, we hope that you can found Bobrick B6806 for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Bobrick B6806, eg:
- What are Top 10 Bobrick B6806 for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Bobrick B6806 to buy?
- What are Top Rated Bobrick B6806 to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bobrick B6806?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bobrick B6806.
- Before deciding to buy any Bobrick B6806, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Bobrick B6806 and What you should consider when buying the Bobrick B6806 and Where to Buy or Purchase the Bobrick B6806. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Bobrick B6806 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bobrick B6806.
