justyoumarket 
Nowadays, there are so many products of mini brushless cooling fan radial in the market and you are wondering to choose a best one. You have searched for mini brushless cooling fan radial in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings mini brushless cooling fan radial which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Fugetek 12V DC Brushless Blower Cooling Fan, HT-07530D12, 75x75x30mm, 2pin, Dual Ball Bearing, Computer Fan, Multi Use, Black, US Support
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Dual Ball bearing. Genuine NSK or NMB balls made in Japan. Guaranteed to continuously run 50,000 hours under normal temperature. Speed: 3500 RPM
- Rated Voltage: 12 V
- Noise Level : 42 dba
- Dimensions:: 75x75x30mm
- 2.95×2.95×1.18″
- Lead wire:UL Type (+):Red (-):Black. This is a two wire blower.
Universal 12v DC Brushless Blower Cooling Fan – Dual Ball Bearing
General Specifications:
Frame: Plastic 94V-0
Impeller: Plastic 94V-0
Lead wire: UL Type (+):Red (-):Black
Operation Temperature: -10℃~ 70℃
Motor Protection: Impedance Protected
Reverse Polarity Protected
Model No: HT 07530
Rated Voltage (VDC): 12
Speed Type: H, M, L
Rated Current (A): 0.30, 0.16, 0.12
Rated Speed _RPM): 3500, 3000, 2500
Air Flow (CFM): 12.02, 9.40, 7.81
Air Pressure (mmAg): 16.81, 9.30, 5.96
Customer Support from our Houston,Tx office. If you have any questions, feel free to call us.
Wathai Brushless Cooling Blower Fan 120mm x 32mm 12V DC Centrifugal Fan High Airflow
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:12V 1.0A
- Speed: 3000RPM
- Air flow: 38.5CFM
- Noise:45dBA
- Connecter: XH2.54-2Pin
- Cable Length: 25cm Or 10 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72×4.72×1.26 in. per fan
Package include: 1 Piece fan and mounting screws & nuts
Size:120x120x32mm
Rated Voltage: 12V
Rated Current: 1.0A
Connecter: XH2.54-2Pin
Power: 12.3W
Speed: 3000RPM
Air flow:38.5CFM
Noise:45dBA
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight: 170g/pcs or 6 oz
SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)
- Cooling Blower Fans
- DC 12V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation and so on—Repair Replacement (1Pack)
- Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5500 RPM
- Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
- Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
- Mounting Spacing : 5.8cm/2.3″
- Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5500 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sleeve Bearing
Similar items with 4 stars and above
UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
Similar items with 4 stars and above
2Packs Wathai 40x40x10mm 40mm 12V Brushless Turbo Blower Centrifugal Fan 2Pin
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:12V 0.1A
- Speed: 7500RPM
- Air flow: 3.86CFM
- Noise:24dBA
- Connecter: XH2.54-2Pin
- Cable Length: 20cm Or 8 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 40mm(L) x 40mm(W) x 10mm(H) / 1.55×1.55×0.4 in. per fan
Package include: 1 Piece fan and mounting screws & nuts
Size:40x40x10mm
Rated Voltage: 12V
Rated Current: 0.1A
Connecter: XH2.54-2Pin
Power: 1.0W
Speed: 7500RPM
Air flow:2.86CFM
Noise:24dBA
Bearing type: Sleeve Bearing
Cable Length: 20cm Or 8 inches
Life: 35000 hours
Weight:10g/pcs or 0.35oz
Similar items with 4 stars and above
Wathai 3007 30mm x 7mm DC Brushless Micro Blower Fan Projector Cooling Fan
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products. MID, UMPC, Smartbook, Handheld POS, and Small Plasma Generator, etc.
- High efficiency and low power consumption
- Package include: 1 Piece fan and mounting screws
- Bearing Type: Sleeve Bearing
- Life: working up to 40000h at 25 degrees.Connector: Ph2.0-2Pin
- 30 x 30 x 7 mm ( 1.18 x 1.18 x 0.27 in. ) | Rated Voltage :12V | Airflow: 1.5 CFM | Power: 1W | Noise: 25dBA | Speed: 8500 RPM
Package include: 1 Piece fan and mounting screws & nuts
Size:30x30x5mm
Rated Voltage:12V
Rated Current: 0.1A
Connecter: PH2.0-2Pin
Power: 1W
Speed: 8500RPM
Air flow:1.5CFM
Noise:25dBA
Bearing type:Sleeve Bearing
Cable Length: 15cm Or 5.9 inches
Life: 40000 hours
Weight:8g/pcs or0.28
SoundOriginal 12V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (12v Dual Ball Bearing 2pack)
- Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
- Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature.
- Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
- Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
- Mounting Spacing : 5.8cm/2.3″
- Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
Conclusion
By our suggestions above, we hope that you can found mini brushless cooling fan radial for you.Please don’t forget to share your experience by comment in this post. Thank you!
