justyoumarket 
Nowadays, there are so many products of anode rod for whirlpool hot water heater in the market and you are wondering to choose a best one. You have searched for anode rod for whirlpool hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings anode rod for whirlpool hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-80 Gallon Tank) – Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to replace your 40-80-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
44 Inch Flexible Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Water Heater Anode Rod for GE, Rheem, Reliance, Richmond, Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Osring Flexible Water Heater Anode Rod 44 Inch with Aluminum Zinc Hex Head, Triple Defense Against Water Odor and Inner-Wall Corrosion, Including Teflon Tape
- Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water.
- Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extending service life of your water heater tank.
- Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection. Perfect for most of water heaters, such as Rheem and Richmond!
- Segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided!
- Easy to replace the anode rod by taking the hex head out and putting the new one into water heater tank. Not recommended when water softener is in use!
Does Your Water Stink Like Rotten Eggs?
If your water smells like sulfur / rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s old anode rod.
This reaction results in hydrogen sulfide gas that causing annoying and embarrassing odor, and also corrode your home’s plumbing pipes and prematurely kill your water heater.
Here, We Have the Solution to Your Smelly Water Problem
By replacing your heater’s old anode with Osring Anode Rod, you will put an end to the reaction and the smell.
No More Rotten Egg Smell!
- Sacrificial Anode rod attracts corrosive elements in the water, and gradually the rod become corroded, so the water tank will never rust out.
- Flexible anode rod 44 inch is built in 4 sections, whose the flexibility keeps it easily installed in water heater tank.
- The anode rod allow you to trim the sections to fit the height of any home water heater, Teflon tape provided for installation.
- Please replacing anode rod about every two years to extend service life of water heater tank.
NOTE: Not recommended when water softener is in use!
Buy with confidence! All of our products are backed with a 120-day manufacturer’s money back guarantee!
About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- FITS: Almost all water heaters including: Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape will leave you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw or similar tool.
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
Similar items with 4 stars and above
Powered Anode Rod System 100305721 for A.O. Smith, Reliance, State, American, Whirlpool, and Craftmaster Branded Hot Water Heaters Up to 50 gallons
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet
- Eliminates smelly water issues caused by sacrificial magnesium anodes
- Great for softened water applications
Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
Conclusion
By our suggestions above, we hope that you can found anode rod for whirlpool hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
