Top 10 Compressor Relay Or Capacitor For Kegerator

Specifications

●Replacement for model No. RCO210

●Applications One size for all compressors from 1/12 hp through 1/2 hp. 

●Maximum RLA 13.3 Amps 

●Mounting: Quick Connect HP RATING – 1/2 

●Solid-state Hard-start Relay, includes relay, overload, and start capacitor.

●Provides a boost for hard start and unbalanced systems 

●Prevents low voltage starting problems

●No additional wires required 

●Used For domestic and commercial refrigeration systems and freezers

Installation Instructions

1. Disconnect power supply.

2. Remove old relay and overload.

3. Push terminal connected to white wire on RCO onto start terminal of compessor.

4. Push terminal connected to red wire on RCO onto run terminal of compressor.

5. Push terminal connected to black wore on RCO onto common terminal of compressor.

6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.

7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.

A capacitor is an electric component that temporarily stores an electrical charge. A dual “run capacitor” supports two electric motors, such as a fan motor and a compressor. Round dual run capacitors are used to start and run the unit more efficient. It saves space by combining two physical capacitors into one case. The dual capacitor has three terminals labeled “C”, “FAN”, and “HERM”, which stand for the *C*ommon, Fan, and *HERM*etically sealed compressor.

Dual capacitors come in a variety of sizes, depending on the capacitance (µF = MFD = micro farad), such as 60 plus 5 µF, and also the voltage. A 440 volt capacitor can be used in place of a 370 volt, as it is build better, but the 370 can’t be used in place of a 440 volt. It will work for a while and will fail prematurely, as exceeding the capacitor’s rated voltage will cause the dielectric to break down and the capacitor to short out. Same as an electric wire- 600V rated wire is better than 300V one .The capacitance(µF or MFD or micro farad) must be the same or stay within 10%+ or 5%- of its original value . Example: 35 µF cap can be substituted by 33 – 38 MFD with the same or better voltage ratings capacitor.

If your fan is working but compressor not, or the capacitor is bulged on top most likely your capacitor is defective. Round capacitor can be used to substitute oval shape one with the same MFD AND Volt specs.

You will ask “Why I need a Cap that is rated 440V in my A/C?”

Answer: You need to realize that a motor is an inductive device. When the supply voltage is applied to the motor run winding, the voltage across the start winding will be increased to a higher voltage value. A motor acts like a transformer with the run winding acting as the primary and the start winding acting as the secondary. This is why the capacitor has a much higher voltage rating than the 230 being the supply voltage.

If a Capacitor is not EIA-456-A approved means it is NOT approved for USA market.

A capacitor is an electric component that temporarily stores an electrical charge. A dual “run capacitor” supports two electric motors, such as a fan motor and a compressor. Round dual run capacitors are used to start and run the unit more efficient. It saves space by combining two physical capacitors into one case. The dual capacitor has three terminals labeled “C”, “FAN”, and “HERM”, which stand for the *C*ommon, Fan, and *HERM*etically sealed compressor.

Dual capacitors come in a variety of sizes, depending on the capacitance (µF = MFD = micro farad), such as 60 plus 5 µF, and also the voltage. A 440 volt capacitor can be used in place of a 370 volt, as it is build better, but the 370 can’t be used in place of a 440 volt. It will work for a while and will fail prematurely, as exceeding the capacitor’s rated voltage will cause the dielectric to break down and the capacitor to short out. Same as an electric wire- 600V rated wire is better than 300V one .The capacitance(µF or MFD or micro farad) must be the same or stay within 10%+ or 5%- of its original value . Example: 60 µF cap can be substituted by 57 – 66 MFD with the same or better voltage ratings capacitor.

If your fan is working but compressor not, or the capacitor is bulged on top most likely your capacitor is defective. Round capacitor can be used to substitute oval shape one with the same MFD AND Volt specs.

You will ask “Why I need a Cap that is rated 440V in my A/C?”

Answer: You need to realize that a motor is an inductive device. When the supply voltage is applied to the motor run winding, the voltage across the start winding will be increased to a higher voltage value. A motor acts like a transformer with the run winding acting as the primary and the start winding acting as the secondary. This is why the capacitor has a much higher voltage rating than the 230 being the supply voltage.

If a Capacitor is not EIA-456-A approved means it is NOT approved for USA market.

Swpeet 240Pcs 24 Kinds Different Electrolytic Capacitors Range 0.1uF－1000uF Assortment Kit

WHY CHOOSE US?
1, Excellent humidity resistance, Miniature size, wide capacitance, reliable performance.
2, Wide applications in computers, data processing, telecommunication, industrial control, etc.
3, 240Pcs 24 Kinds Different Electrolytic Capacitors, All of the capacitor is marked the value,easy to find what you need. Great value for money.

Specifications:
Material: Aluminum
Color: Black
Packing: “PP” box Nominal Capacitance : 0.1uF-1000uF
Capacitance Tolerance: electrolytic +/-20%
Operating temperature range: -55~+105℃
Leakage current(20℃): Less than 0.01CrUr(uA) or 3uA
Dissipation factor (120Hz 20℃): ≤20%

Package included:
0.1uF 50V 4 x7 ——– 10Pcs
0.22uF 50V 5×11 ——– 10Pcs
0.47uF 50V 5×11 ——– 10Pcs
1uF 50V 5×11 ——– 10Pcs
2.2uF 50V 4×7 ——– 10Pcs
3.3uF 50V 4×5 ——– 10Pcs
4.7uF 50V 4×7 ——– 10Pcs
10uF 25V 4×7 ——– 10Pcs
10uF 50V 5×11 ——– 10Pcs
22uF 16V 4×7 ——– 10Pcs
22uF 25V 4×7 ——– 10Pcs
33uF 16V 4×7 ——– 10Pcs
47uF 10V 4×5 ——– 10Pcs
47uF 25V 5×11 ——– 10Pcs
47uF 50V 6×11 ——– 10Pcs
100uF 16V 5×11 ——– 10Pcs
100uF 25V 5×11 ——– 10Pcs
220uF 10V 5×11 ——– 10Pcs
220uF 25V 6×11 ——– 10Pcs
330uF 25V 8×12 ——– 10Pcs
470uF 10V 6×11 ——– 10Pcs
470uF 16V 8×12 ——– 10Pcs
680uF 16V 8×12 ——– 10Pcs
1000uF 16V 10×16 ——– 10Pcs

【Specifications:】
– Color: Yellow
– Package Quantity: 720 PCS
– Material: Aluminum + Ceramic
– Capacitance Tolerance: ±5%
– Nominal Capacitance: 0.1uF~10nF
– Product Type: High Quality Multilayer Monolithic Ceramic Capacitor Assortment Kit

【Features:】
1, Radial leaded multilayer ceramic capacitor, coating by epoxy resin.
2, Excellent humidity resistance, miniature size, wide capacitance, reliable performance. Widely applications in computers, data processing, telecommunication, industrial control, etc.

【Package Included:】
0.1uf (104) ———————— 30PCS
0.15uf (154) ———————- 30PCS
0.22uf (224) ———————- 30PCS
0.33uf (334) ———————- 30PCS
0.47uf (474) ———————- 30PCS
0.68uf (684) ———————- 30PCS
1uf (105) ————————– 30PCS
2.2uf (225) ———————– 30PCS
4.7uf (475) ———————– 30PCS
10uf (106) ———————— 30PCS
10pF(100) ———————- 30PCS
20pF (200) ——————— 30PCS
30pF(300) ———————- 30PCS
47pF(470) ———————- 30PCS
68pF(680) ———————- 30PCS
100pF(101) ——————— 30PCS
200pF(221) ——————— 30PCS
300pF(331) ——————— 30PCS
680pF(681) ——————— 30PCS
1nF(102) ————————- 30PCS
4.7nF(472) ———————- 30PCS
10nF(103) ———————– 30PCS
47nF(473) ———————– 30PCS
100nF(104) ——————— 30PCS

【Total: 24Value 720PCS DIP Monolithic Multilayer Ceramic Chip Capacitors】

Notes: Small parts, keep away from children under 6 years old.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Compressor Relay Or Capacitor For Kegerator, eg:

• What are Top 10 Compressor Relay Or Capacitor For Kegerator for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Compressor Relay Or Capacitor For Kegerator to buy?
• What are Top Rated Compressor Relay Or Capacitor For Kegerator to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Compressor Relay Or Capacitor For Kegerator?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Compressor Relay Or Capacitor For Kegerator.
• Before deciding to buy any Compressor Relay Or Capacitor For Kegerator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Compressor Relay Or Capacitor For Kegerator and What you should consider when buying the Compressor Relay Or Capacitor For Kegerator and Where to Buy or Purchase the Compressor Relay Or Capacitor For Kegerator. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Compressor Relay Or Capacitor For Kegerator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Compressor Relay Or Capacitor For Kegerator.