The 9 Best Cooling Fan Rocker Switch

This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP. Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life.
Quantity: 1 Pcs
Specification:
9 Patterns (type): Off-Road Light / LED Light Bar / Reverse Light / Spot Light / Driving Light / Tray Light / Zombie Light / Rear Light / Roof Light
Material: ABS & Environmental anti-retardant materials
Color: Black
LED Light Color: Green
Number of Light: 2 Led Light
Size: 2″ (50mm) x 1″(25mm).
Standard size mounting hole : 1.41″(36mm) x .86″(22mm)
Type: SPST
Electrical : ON-OFF
Pin: 5
DC 12V/20A,24V/10A
Package includes:
1 x Green LED Switch

✔Great Performance

PREVENTATIVE PROTECTION Device equipped with output circuit protection, overload protection, reverse polarity protection, making it safe to use and extends its lifespan and durability. Waterproof casing helps protect against rain and coffee spills, but it is not recommended to submerge the product in water. Product does not generate heat, which adds to the safety of its application. Its universal fit makes it compatible with all DC 12V/20A,24V/10A car battery installation, such as cars, motorcycles, buses, boats, RVs, boats, trailers, etc. Standard application of product includes upgrading headlights switch, warning lights, wide light switch, car switch, boat switch, and much more.

✔High Quality

ANTI-CORROSIVE AND ABS MATERIAL Product is made of reliable materials that give it anti-corrosive properties, also making it resistant to high and low temperatures to ensure long-lasting high quality performance. Surface is smooth and ready for use with up to 50,000 guaranteed clicks.

Includes:

✭1x Rocker Switch

Specifications

Material: Environmentally-friendly ABS

Voltage: 12-24v

Dimensions: 43mm X 24mm X 21mm X 37mm

Product color:Black

Light : LED

Electrical life: switch 10000 times.

Mechanical life: switch 50000 times.

Operating temperature: -40 ° C to 85 ° C.

Specifications:

Product Intended Use: LED Rocker Switch Provides simple On and Off function for various applications. All symbols are laser etched directly onto the switch face to ensure long image life. We have many designs to accommodate Cars, Trucks, SUV, Jeeps, Boat, Tracker, and many more!
20 Amp 12 Volt On-Off LED Rocker Switch
Pin Setup – 5 Pin
Single Pole ON-OFF Switch
Laser Etched
Design – Black Hard Surface Rocker
Surface Size: 2″ Inch x 1″ Inch
Standard Size Mounting Hole: 1.41″ Inch x .86″ Inch
Function: Upper Light is ON when switch is pressed up
Lower LED is Independent and can be wired to separate dash circuit
Both LED’s have separate grounds
Size Size as the ARB Switches (Same Configuration)
No Rear Barriers Between Terminals
Waterproof Rating IP66

20 Amp 12 Volt ON-OFF Rocker Switch

FEATURES:
Single Pole Single Throw ON-OFF Switch.
Easy installation (wiring instructions included).
Illuminated laser etched with two L.E.D. Lights.
Very durable made of high-quality plastic.
Universal custom design, used in many applications to control: LED light bars, LED work lights, AWD, fog lamps, driving lights, headlights, tail lights, chase lights, off-road lights, horn, winch, rock lights, whip lights, fan, fuel pump, accessories etc

DESCRIPTION:
• Black hard surface rocker with illuminated LED’s
• Surface size is 2″ (50mm) x 1″(25mm)
• Standard size mounting hole 1.41″(36mm) x .86″(22mm). This is the standard size of most switch holes in modern vehicles.
• Upper light is ON when the switch is pressed UP.
• Lower LED is independent and can be wired to separate dash light circuit.
• Both LEDs have separate grounds.
• No rear barriers between terminals.
• Waterproof rating of IP66.
• All symbols and designs are laser etched directly onto the switch face to ensure long image life.
• Rated at 20 Amps 12 Volts DC and 10 Amps 24 Volts DC.

PACKAGE INCLUDES:
1 rocker switch
Wiring instructions

1 YEAR MANUFACTURER WARRANTY

Specifications:

Product Intended Use: LED Rocker Switch Provides simple On and Off function for various applications. All symbols are laser etched directly onto the switch face to ensure long image life. We have many designs to accommodate Cars, Trucks, SUV, Jeeps, Boat, Tracker, and many more!
20 Amp 12 Volt On-Off LED Rocker Switch
Pin Setup – 5 Pin
Single Pole ON-OFF Switch
Laser Etched
Design – Black Hard Surface Rocker
Surface Size: 2″ Inch x 1″ Inch
Standard Size Mounting Hole: 1.41″ Inch x .86″ Inch
Function: Upper Light is ON when switch is pressed up
Lower LED is Independent and can be wired to separate dash circuit
Both LED’s have separate grounds
Size Size as the ARB Switches (Same Configuration)
No Rear Barriers Between Terminals
Waterproof Rating IP66

These high quality 12 volt Rocker switch is a single throw ON – OFF switch designed to operate your 12 volt accessories. They have a face surface size of 2” (50mm) x 1” (25mm) and uses a standard din size mounting hole of 1.41” (36mm) x .86” (22mm) this is the standard size of most switch holes in modern vehicles, however it is best to check your particular hole size if unsure. ——– All symbols are laser etched directly onto the switch face to ensure long image life. We do not use stickers or ink which will wear off in a very short time.

blue illuminated 50 Caliber Racing On/Off Rocker Switch with laser etched design 

High quality 50 Caliber Racing illuminated ON/OFF rocker switch with a custom laser etched design rated for 12 Volts and 20 Amps. Two waterproof LED lights to illuminate the custom design. Rear facing spade terminals for easy wiring and standard style sizing for easy installation. Made from high impact black ABS plastic, these durable switches are perfect for your boat, car, truck, sand rail or UTV!

Details:
– Single Pole, Single Throw On/Off Rocker Switch
– 12 Volt, 20 Amp rating
– IP66 Waterproof rating
– Durable ABS construction
– Laser etched design
– Dual LED illumination
– Standard size mounting hole: 1.41” x .86”

This accessory OEM style rocker switch is made for Jeep TJ Wranglers . This Switch is rated at 12 volts 15 amps. Simply snaps into your existing dash panel. It is custom made for running aftermarket accessories such as off-road lights, rock lights, back-ups, air compressors, etc. Be sure to always use a relay to power your accessories, not a switch

This accessory OEM style rocker switch is made for Jeep TJ Wranglers . This Switch is rated at 12 volts 15 amps. Simply snaps into your existing dash panel. It is custom made for running aftermarket accessories such as off-road lights, rock lights, back-ups, air compressors, etc. Be sure to always use a relay to power your accessories, not a switch RELAY INCLUDED

Conclusion

By our suggestions above, we hope that you can found cooling fan rocker switch for you.Please don’t forget to share your experience by comment in this post. Thank you!