justyoumarket 
Nowadays, there are so many products of cooling module 12v in the market and you are wondering to choose a best one. You have searched for cooling module 12v in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling module 12v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
ESUMIC 5PCS TEC1-12704 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 36W
- 1. Model: TEC1-12704. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 3. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 4. Performance:Each device is full and inspected tested. Easy to install and use.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12704
– Size: Approx. 40mm x 40mm x 4.0mm
– Voltage: DC 12V
– Max Power: 36W
– Imax (A): 4A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
5PCS x TEC1-12704Thermoelectric Cooler
GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A
Feature:
100% Brand new and high quality.
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
These devices must be used in conjunction with a heat sink to avoid burned.
Each device is full inspected and tested.
Fitted with 6-inch insulated leads.
Specifications:
Model: TEC1-12706
Size: Approx. 40mm x 40mm x 3.8mm
Voltage: 12V
Umax (V): 15V
Cooling power: Qcmax 58-65W
Imax (A): 5.8A
△Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: 25-30cm
Package Included:
10* TEC1-12706 Thermoelectric Cooler
ESUMIC 5PCS TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 60W 5.8A
- 1. Description: Model: TEC1-12706. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 3. Performance:Each device is full and inspected tested. Easy to install and use.
- 4. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12706
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 60W
– Imax (A): 5.8A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
5PCS x TEC1-12706 Thermoelectric Cooler
Aideepen 5pcs TEC1-12706 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
Similar items with 4 stars and above
diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
ESUMIC 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 60W 5.8A
- 1. Model: TEC1-12706. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Performance:Each device is full and inspected tested. Easy to install and use.
- 3. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 4. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12706
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 60W
– Imax (A): 5.8A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
10PCS x TEC1-12706 Thermoelectric Cooler
12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cooling System Heat Sink Conduction Module DIY Kit with Fan for Air Cooling Dehumidification System, Semiconductor Refrigeration Learning
- Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc
- Simple operation, good practicability
- Cooling quickly, outstanding effect
- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques
Features:
Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc. Simple operation, good practicability. Cooling quickly, outstanding effect. Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
Specifications:
Working current: 6A
Working voltage: 12V
Can also use 12V 10A power supply, frozen fast.
Power: 72w
Size: 175 * 100 * 98 mm/6.88 * 3.93 * 3.85inch
Package Included:
1 x Semiconductor Refrigeration
Portable Cooling Module 12V 10A 120W,Semiconductor Refrigeration Pieces Kit Thermoelectric Peltier Air Cooling Device with 12706 Chip for Pet Bed Cooling Small Space Cooler
- Voltage: 12V
- Current: 10A
- Rated power: 120W
- Material:aluminum + plastic fan
- Dual-core Semiconductor Refrigeration size: 200 x 120 x 100mm / 7.87 x 4.72 x 3.93 inch
- No noise, no vibration, no refrigerant required. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling
- Can used for plate cooling, pet bed cooling, test bench, small space cooling
Specification:
Material: aluminum + plastic fan
Rated power: 120W
Voltage: 12V
Current: 10A
Package Includes:
1 x Dual-core Semiconductor Refrigeration Cooling chip: TEC1-12706 Size: 200 * 120 * 100mm/7.87 *4.72 * 3.93 inch
DAOKI 2PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 6A
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
- These devices must be used in conjunction with a heat sink to avoid burned
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
Description:
Model: TEC1-12706
Size: 40mm x 40mm x 3.8mm
Operates from 0~15V DC and 0~5.8A
Operates Temperature: -55 to 83
Max power consumption: 65 Watts
Original box: NO
Net weight: 22g
Package weight: 31g
Color: White
Package Content:
2 x Thermoelectric Cooler
Conclusion
By our suggestions above, we hope that you can found cooling module 12v for you.Please don’t forget to share your experience by comment in this post. Thank you!
