justyoumarket 
Nowadays, there are so many products of digital cooling thermostat controller solar water heater in the market and you are wondering to choose a best one. You have searched for digital cooling thermostat controller solar water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings digital cooling thermostat controller solar water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
- Simplified Design—Easy to set. Support °F display
- One Relay Output—Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
- Safe Protection—High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
- Warranty—1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor
- Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mA
- Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures
- Clear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection.
- With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc.
- Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
Product Description:
Product Name: Programmable Dual LED Display Temperature Controller
Operating Voltage: DC12V 200mA
Measurement Range: -50 to 110 Celsius (-58 to 230 F)
Elaboration Precision: +/-0.1 Celsius
Control Precision: 0.1 Celsius
Backlash Precision: 0.1 Celsius
Refresh Rate: 0.5s
High Temperature Protection: 0 to 60 Celsius (32 to 230 F)
Temperature Sensor Type: 10K 0.5% NTC
Operating Temperature: -10 to 60 Celsius (14 to 140 F)
Compatible Load: 5A / 15A 220VAC; 20A 14VDC
Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure)
Module Size: 48x29x32mm / 1.89×1.14×1.26 inch (LxWxH)
Temperature Setting:
Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit.
Indicator:
Lights on, relay closed; Lights out, relay disconnected.
LED Display:
Red: Measuring Temperature; Blue: Setting Temperature
LL: Means the sensor is open
HH: Indicates that the temperature exceeds the measurement range of the module
–: Indicates that the module is under high temperature protection
Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting):
P0, Heating/Cooling, H/C, C
P1, Return difference, 0.1-30, 2
P2, Set limit maximum, +110, 110
P3, Set limit minimun, -50, -50
P4, Temperature correction, -15 – +15, 0
P5, Delay start, 0-10, 0
P6, High temperature alarm, -50 – +110, OFF
P7, Celsius/Fahrenheit, CS/FH, CS
P8, Factory reset, ON-OFF, OFF
Package Content:
1pc Temperature monitoring controller
1pc operating manual
Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58℉~ 716℉ (-50℃ ~ 380℃), Yellow and Black
- BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 774 can accurately measure targets at greater distances compared to most other IR Thermometers
- For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
- TARGET QUICKER: Measure surface temperature ranging from -58℉~ 716℉ / -50℃ ~ 380℃, you can choose the unit from ℉ / ℃
- Response time: ≤500Ms
- A built in Laser gives you the precision to hone in on the exact space you want to measure
- ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
- VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points
- Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
- NOTE: The thermometer can’t measure the internal temperature of an object
- Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct
- FDA, FCC, CE approved
- Class 2 laser, optical power 0.5-0.9mW
- 1 year warranty (with the option to extend it by 1 extra year for free) by Etekcity
Intelligent Temperature Switch,Temperature Sensor Solar Heater Controller,Temperature Controller Thermostat with Sensor Digital Display
- When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium
- The products are used in solar water heater, the temperature difference and temperature to control the output
- The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature
- It is provided with two output control, temperature difference control two temperature zone
- It will control heating system and automatically makes water temperature stay in temperature deference range
Features:
The products are used in solar water heater, the temperature difference and temperature to control the output. It is provided with two output control, temperature difference control two temperature zone.
When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium. The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature. It will control heating system and automatically makes water temperature stay in temperature deference range.
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Light Function Setting Range Default Unit #1 temperature difference start stop pump temperature difference +1~50 5 ℃ #1, #2 stop pump temperature difference 1~temperature difference start-1 2 ℃ #2 temperature return difference 1~20 5 ℃ #3 high temperature correction -10~10 0 ℃ #4 low temperature correction -10~10 0 ℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Temperature Controller for Solar Water Heater Digital Display AC 220V with Sensor Thermostat Comtrol Automatic Heating or Cooling
- The products are used in solar water heater, the temperature difference and temperature to control the output
- It is provided with two output control, temperature difference control two temperature zone
- When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium
- The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature
- It will control heating system and automatically makes water temperature stay in temperature deference range
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Light Function Setting Range Default Unit #1 temperature difference start stop pump temperature difference +1~50 5 ℃ #1, #2 stop pump temperature difference 1~temperature difference start-1 2 ℃ #2 temperature return difference 1~20 5 ℃ #3 high temperature correction -10~10 0 ℃ #4 low temperature correction -10~10 0 ℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Digital Temperature Controller, Solar Water Heater Temperature Controller Thermostat with Sensor Digital Display
- It is provided with two output control, temperature difference control two temperature zone
- The products are used in solar water heater, the temperature difference and temperature to control the output
- When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium
- The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature
- It will control heating system and automatically makes water temperature stay in temperature deference range
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Light Function Setting Range Default Unit #1 temperature difference start stop pump temperature difference +1~50 5 ℃ #1, #2 stop pump temperature difference 1~temperature difference start-1 2 ℃ #2 temperature return difference 1~20 5 ℃ #3 high temperature correction -10~10 0 ℃ #4 low temperature correction -10~10 0 ℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Temperature Controller, Solar Water Heater Temperature Controller Thermostat with Sensor Digital Display
- The other channel controls electric heating, when the solar heating failed to reach the set temperature, the electric heating system can automatically start and heat to the set temperature
- The products are used in solar water heater, the temperature difference and temperature to control the output
- When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium
- It will control heating system and automatically makes water temperature stay in temperature deference range
- It is provided with two output control, temperature difference control two temperature zone
Specifications:
Working Voltage: AC220V ±10%(50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
LightFunctionSetting RangeDefaultUnit#1temperature difference startstop pump temperature difference +1~505℃#1, #2stop pump temperature difference1~temperature difference start-12℃#2temperature return difference1~205℃#3high temperature correction-10~100℃#4low temperature correction-10~100℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes
Conclusion
By our suggestions above, we hope that you can found digital cooling thermostat controller solar water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
