justyoumarket Nowadays, there are so many products of home hardware nail gun in the market and you are wondering to choose a best one.You have searched for home hardware nail gun in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home hardware nail gun which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
885 reviews analysed
BOSTITCH MCN-150 StrapShot Metal Connector Nailer
- Exposed nail tip places fastener point directly into connector holes for a faster, more precise application
- Drives 1-1/2-inch straps hot fasteners as well as all other paper tape collated metal connector nails (.131 – .148 diameter)
- At 4.6 pounds, The tool is up to 50% lighter than competitive models
Product Description
Metal connector nailer, drives galvanized, hardened, 1-1/2 inch metal connector nails, nails come in .131 0R .148 shank diameters, tool weight is 4.6 lbs. compact design 12 inch OC joists, comes with carrying case.
Amazon.com
Todays homes are stronger than ever. More knowledgeable homeowners, natural disasters, and stricter building codes have led the industry to adopt better ways of building houses. One important result of this has been the massive rise in the use of metal connectors. These metal connectors, whether it is in the form of a hurricane tie, joist hanger, or stud plate tie are used to strengthen the weaker joint areas of a home. Their popularity has given rise to a new necessity on the jobsite, the nailer to attach all of these metal connectors.
The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) is the perfect tool for all types of metal connectors. Its exposed nail tip places the fastener point directly into connector holes for a faster, more precise application. It has a built in safety that prevents the tool from firing when not placed properly into the connector hole. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) drives 1-1/2-inch, 35 degree Paper Tape Metal Connector Nails to secure any type of metal connector plate. These nails come specially hardened to ensure that if there is a misfire it can still drive through the metal connector plate safely.
One of the features that set the Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) apart from similar nailers is its size. Its compact design fits easily into hard to reach spaces including 12 inches on center studs (MCN150 only 10-1/2 inches tall). The tool is up to 50% lighter than competitive models for reduced fatigue and added maneuverability. The in line magazine also helps maneuverability by fitting into corners easily. Its low nail lockout feature prevents jams by preventing cycling with less than 5 nails for added safety. The tool also comes with hardened steel wear guards to protect the tool and adjustable exhaust to conveniently direct air away from the user. Finally, Bostitch has included a carrying case and our exclusive 7-Year Limited Warranty.
BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)
- 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
- Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
- Durable yet lightweight aluminum and carbide tips for long life
- Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
- Backed by seven-year limited warranty
Product description
Bostitch Stanley Rn46-1 Nailer Roofing
From the Manufacturer
No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business–the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won’t fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.
Metabo HPT Positive Placement Nailer, Short Magazine, Pneumatic, Accepts 1-1/2" and 2-1/2" Nails, Metal Connector, Strap-Tite Fastening System, (NR65AK2(S))
- Same tools. New name. Hitachi power tools has renamed to Malabo HPT
- Short magazine allows nailing in the tightest of spaces
- For fastening various types of pre-punched hole metal connectors to wood
- Accepts 1-1/2″ & 2-1/2″ Strap-Tite, Paper Strip Collated nails
- Positive safety allows tool to use the nail as a guide without damaging the collation
- Comfortable soft trigger covered with double-molded elastomer
- Adjustable air deflector directs the air exhaust in any direction
The NR65AK2(S) Strap-Tite strip nailer accepts 1-1/2″ and 2-1/2″ fasteners while offering superior precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement. The short magazine allows nailing in even the tightest of spaces.
BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing
- N/A
- Made in USA
- Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300
- Adjustable depth guide sets nails to desired depths quickly and conveniently
- Lightweight aluminum design for added durability
- Soft rubber foot prevents damage to softer woods
- Tool-free adjustable exhaust conveniently directs exhaust away from the user
Product Description
Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96″; Air Inlet Size: .25″; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4″ – 2 1/2″). Includes: Carrying Case.
Amazon.com
Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you’re working.
|
||||
|
 All-day siding jobs are easier on your hands thanks to lightweight magnesium housing. View larger. |
 Accepts both wire-weld and plastic-inserted coil nails from 1.25″ to 2.5″. View larger. |
Works with a Variety of Siding Materials, from Soft Wood to Steel
Pretty much no matter what type of siding you’re working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that’s perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.
The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.
The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you’re working.
Lightweight, Durable Construction for Everyday Use
Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. The N66C-1 stores in its included protective carrying case when not in use.
The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.
About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers–many of them industry firsts.
What’s in the Box
Siding nailer and carrying case.
BOSTITCH Framing Nailer, Clipped Head, 2-Inch to 3-1/2-Inch(F28WW)
- The product is Stick Framing Nailer
- Easy to use
- The product is manufactured in United States
- 28° Wire Collated Stick Framing Nails. Thread Fitting Type- 1/4 inch NPT. Magazine Capacity-100 Nails
- 2- to 3-1/2-inch framing nailer
- Driving power: 1050-inch-pounds
- pushbutton depth of drive
- Sets up as sequential- or bump-fire trigger
- Length: 20-inches
- 7-year manufacturer warranty
Product Description
The product is stick Framing nailer. Easy to use. The product is manufactured in United states.
Amazon.com
Framing, siding, decking, attaching wood to masonry, you name it, this versatile and lightweight framing nailer from Bostitch does it all. This nail gun is equipped with a patented pushbutton adjustable depth guide that sets the nail to desired depths quickly and conveniently. A depth-of-drive control of course means theres no adjusting compressor pressure, but also that you dont have to fumble for tools when youre standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.
Weighing just 7.6 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is a big plus when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A factory installed sequential trigger and Bostitchs exclusive Smart Trigger ensure optimal control and faster production. The trigger works as either a sequential or bump fire trigger. A notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, a lightweight magnesium housing means easy handling and unsurpassed durability
.
The unit drives 2- to 3-1/2-inch wire-collated framing nails. One of the most powerful framers on the market, this nailer features 1,050 inch-pounds of driving power for tackling even toughest engineered lumber applications. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for durability and years of use.
–Brian D. Olson
Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Side Load) (Discontinued by the Manufacturer)
- Tool-less depth of drive adjustment for precision nailing/flush driving
- 5.5lbs, lightweight and well balanced for easy maneuverability
- Side loading magazine convenient and easy for quick replenishment
- Rubber pads help keep nailer from sliding off roof when not in use.Pneumatic power feed and return allows tool to operate in the harshest conditions
- Operating Pressure:70-120 psi
Product Description
The NV45AB2’s “magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work,” Tools of the Trade Magazine, July/August 2005. The 1-3/4″ Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.
Amazon.com
Lightweight and durable, the Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer stands up to the elements and provides consistently accurate results over the life of the tool. An ideal tool for a variety of construction projects, including installation of asphalt roofing shingles and insulation boards, the NV45AB2 features a high-capacity side-load magazine, depth of drive, durable construction, and more.
All-Weather Nailer You Can Count On
The NV45AB2 has been rigorously tested in the most extreme roofing environments, so you can count on it–no matter what the forecast is. Thanks to a pneumatic-powered nail-feed mechanism that removes dirt and moisture from the nailer, you can be sure this tool will work in any weather.
High-Capacity Magazine and Quick-Driving Capabilities for Efficiency
The NV45AB2 features a side-loading magazine that accepts 120 7/8-inch to 1-3/4-inch-long coiled wire collation nails with 0.120-inch diameters. The air inlet is 3/8 inch, and the ideal operating air pressure is 70-120 psi.
The NV45AB2 has a quick-driving feature that provides maximum efficiency when nailing large areas by allowing the nailer to shoot each time the nose touches the work surface. The large carbide inserts on the nose provide durability and performance during operation.
Designed for Maneuverability
The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is lightweight at just 5.5 pounds, so it’s easy to maneuver while working on a rooftop. Its well-balanced design ensures easy one-handed operation, and the long-lasting non-slip rubber-grip keeps you comfortable and in control. Rubber on the nailer’s side allows you to place the tool on a roof without worrying about it sliding off.
The Hitachi NV45AB2 Roofing Nailer measures 9-27/32 x 4-5/8 x 10-3/8 inches (LxWxH). It is backed by Hitachi’s five-year limited warranty.
About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
What’s in the Box
NV45AB2 1-3/4-Inch Coil Roofing Nailer, safety glasses, and shingle guide assembly.
Metabo HPT Positive Placement Nailer | Pneumatic | Accepts 1-1/2" and 2-1/2" Nails | Metal Connector | Strap-Tite Fastening System (NR65AK2)
- Strap-tite metal connector nailer
- Includes: NR65AK2 nailer, Safety Glasses (875769)
- Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
- Accepts 1-1/2″ & 2-1/2″ Strap-Tite, Paper Strip Collated nails
- For fastening various types of pre-punched hole metal connectors to wood
- Adjustable air deflector directs the air exhaust in any direction safety allows tool to use the nail as a guide without damaging the collation
- Sequential drive mechanism ensures precision nail placement
- Positive safety allows tool to use the nail as a guide without damaging the collation
- Rated the Pro Preferred Nailer for 6 years running (2014 – 2019) by Builder and Developer Magazine
The NR65AK2 Strap-Tite strip nailer accepts 1-1/2″ and 2-1/2″ fasteners while offering superior precision and control for all metal connecting needs. The NR65AK2 Strap-tite nailer is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement.
WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer with 2000 Nails
- Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
- Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
- Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
- Hassle-free nose latch makes clearing jammed nails quick and easy
- Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails
Metabo HPT NR38AK Positive Placement Metal Connector Pneumatic Nailer, Strap-Tite Fastening System, Accepts 1-1/2" Nails, For Fastening Various types of Pre-Punched Hole Metal Connectors to Wood
- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- Lightweight and well-balanced at 4.6 lbs For excellent maneuverability
- Narrow design for ease of use in tight spaces
- Positive safety allows tool to use the nail tip as a guide without damaging the collation
- Sequential drive mechanism ensures precision nail placement
BOSTITCH Coil Framing Nailer, Round Head, 1-1/2 to 3-1/4-Inch (N80CB-1)
- N/A
- Made in USA
- The product is Coil Frame Nailer
- Easy to use
- The product is manufactured in Taiwan
- Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
- Contact-trip trigger
- large-capacity magazine
- Aluminum housing
- Accomodates nails from 1-1/2 to 3-1/4 inches
- Weighs just 8 pounds
- 7-year warranty
- made in the Taiwan
Product Description
The product is Coil Frame Nailer. Easy to use. The product is manufactured in Taiwan.
Amazon.com
A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch’s utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn’t the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls–the inevitable beating nailers take on a job site. The nailer’s aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels–it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. –Jonathon Tudor
Conclusion
By our suggestions above, we hope that you can found Home Hardware Nail Gun for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Home Hardware Nail Gun, eg:
- What are Top 10 Home Hardware Nail Gun for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Home Hardware Nail Gun to buy?
- What are Top Rated Home Hardware Nail Gun to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Hardware Nail Gun?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Hardware Nail Gun.
- Before deciding to buy any Home Hardware Nail Gun, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Home Hardware Nail Gun and What you should consider when buying the Home Hardware Nail Gun and Where to Buy or Purchase the Home Hardware Nail Gun. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Home Hardware Nail Gun of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Hardware Nail Gun.
