justyoumarket 
Nowadays, there are so many products of hot water heater expansion tank mounting bracket in the market and you are wondering to choose a best one. You have searched for hot water heater expansion tank mounting bracket in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water heater expansion tank mounting bracket which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
13,425 Reviews Scanned
Holdrite QS-5 Plumbing Bracket, Misc
- SAFE: Secures tank to wall and takes weight load off pipes
- MATERIAL: Galvanized and Stainless Steel construction
- SIZE: Supports tanks from 5 inch – 9 Inch diameter
- RATED: Compliant ith UPC/IAPMO and IPC requirements
- MADE IN USA: Designed, machined, and assembled in America
The HoldRite Quick Strap Expansion Tank Mounting Bracket for 2.5 gallon tank. Transforming the plumbing industry through innovation. HoldRite: Converting Makeshift Methods into Engineered Solutions. The last three decades have seen HoldRite evolve from a single product family business to an international corporation and acknowledged industry leader. HoldRite has established a reputation as a leading manufacturer known for innovative products and services in such categories as pipe and equipment support systems, acoustical plumbing solutions, water heater accessories, and water and firestop sleeving systems.
Expansion Tank Mounting Bracket 5Gal Capacity Water Heater Strap Stainless Steel
Secures tank to wall and takes weight load off of pipes.
Galvanized and stainless steel construction. Supports tanks up to 9.5″ to 13″ in diameter.
5 Gallon Capacity – Tank Not Included.
KleenWater Hot Water Filter (1), Mounting Bracket (1), High Temp Cartridges, 5 Micron (3), Spare O-ring (1), Filter Wrench (1)
- Includes filter housing
- 3 polypropylene cartridges
- spare o ring
- wrench
- mounting bracket
- Ideal for commercial or residential hot water filtration and outdoor wood burning furnances
- Compatible with domestic hot water systems
- Maximum temperature 176 degrees F – 3.4″ NTP female connection ports
- Sediment filter cartridges rated at 5 microns – Made in the USA
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free
WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free
Cash Acme Water Heater Tank Booster Pro, Thermostatic Mixing Valve 3/4″ with Temperature Gauge, Braided Hose, Domestic and Commercial Application
- COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters
- PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures
- SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets
- COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature
- SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing
Flextrol FTT12 Thermal Expansion Tanks-for Hot Water Heaters, Carbon Shell, Stainless Steel 3/4 Inch MIP Connection, Butyl Diaphragm, 150 PSI, 210 Degrees Fahrenheit, Almond Color, 4.8 Gallons
- Thermal Expansion Tanks Are Used to Prevent Plumbing System And/or Water Heater Damage and Unnecessary Relief Valve Discharge Caused by Excessive Pressure from Thermal Expansion
- Prevent Dangerous Pressure Build Up & Protect Household Appliances and Fixtures
- External Baked Epoxy-Polyester Coating Provides a Durable Appliance Finish
- Exclusive Polypropylene Liner Eliminates Internal Corrosion
- Protect Safety Valves from Failing
- Save Energy and Water
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made in Italy
- All Tanks Are NSF61 Certified
What is Thermal Expansion?
When heated, water expands. Under normal circumstances, a 40 Gallons hot water heater creates roughly an additional half gallon of water when heated (with no demand). In the past this expanded water would flow back into the public water supply. However, in many countries, where applicable by code, a backflow preventer is required, creating a closed system and a new problem as this extra half gallon of water is not compressible. When an expansion tank is installed the excess water enters the pre-pressurized tank. As the temperature and pressure reaches its maximum, the diaphragm flexes against an air cushion (air is compressible) to allow for increased water expansion. When the system is opened again or the water cools, the water leaves the tank and returns to the system.
Potential Problems Without an Expansion Tank
- Premature failure of the water heater may void the warranty of the water heater
- Dangerous high pressure
- leaky fittings and valves
- collapsed center flues
- flames out of combustion chamber
- Unnecessary Relief Valve Discharge
Installation Options for Thermal Expansion Tanks
- Install on the cold water side after the pressure reducing valve and between the backflow preventer and the water heater
- Do not install in an area where leakage could cause property damage
- The tank can be installed either vertically or horizontally. However, if the tank is to be installed horizontally, then it must be fully supported independent from the piping. Failure to do so will void the warranty.
Technical Features
- All tanks are NSF61 Certified
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested
- 150 PSI Max pressure rating
- External baked epoxy-polyester coating provides a durable appliance finish
- Exclusive polypropylene liner eliminates internal corrosion
- Protected precharge valve eliminates potential leak path
Material Description
- Shell: Carbon Steel
- Connection: Stainless steel
- Diaphragm: Butyl
- Color: Almond
Operating Conditions
- Max. Operating Pressure: 150 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 40 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTT12
- Tank Size: 4.8 Gallons
- Tank Weight: 10 Pounds
- Connection Size (National Pipe Thread): 3/4" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 16" x 11" x 11"
- Acceptance Volume: 3.3 Gallons
- UPC Code: 80459513078
Similar items with 4 stars and above
Watts DET-5 2.1 G Potable Water Expansion Tank for 50-Gallon Water Heaters
- Protects the water heater from thermal expansion^Absorbs the increased volume of water created when water is heated^For water heaters up to 50-Gallon^Contains a durable membrane to prevent contact of water with air in the tank^Pre-pressurized steel tank at 20 psi
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
Vestil CB-W-S Wall-Mounted Bracket for 1 Cylinder, Steel
The Vestil CB-W-S wall-mounted bracket is made of steel, has a strap with a buckle, and can be used to hold one gas cylinder measuring up to 12″ in diameter (cylinder sold separately). Steel is resistant to impacts, wear, and corrosion. The strap and buckle can be tightened around the cylinder to secure it. Rubber guards along the edges of the bracket help keep the cylinder from getting scratched. Holes in the bracket can be used to mount it to a wall (fasteners sold separately). The bracket weighs 3 lb. This product is intended for use in professional and industrial environments.
Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.
Conclusion
By our suggestions above, we hope that you can found hot water heater expansion tank mounting bracket for you.Please don’t forget to share your experience by comment in this post. Thank you!
