justyoumarket 
Nowadays, there are so many products of lab oven controlled temperature in the market and you are wondering to choose a best one. You have searched for lab oven controlled temperature in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings lab oven controlled temperature which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Mophorn Vacuum Oven 1.9Cu Ft Vacuum Drying Oven with 9cfm Pump Lab Vacuum Drying Oven Dual-Layer Tempered Glass Window with LCD Display Screen
- [PARAMETER]–Vacuum Oven:Input: 110V
- Power: 1400W
- Temperature Variation: +/-0.5ºC
- Vacuum Pump:Input: 110V
- Rotating Speed: 1400rpm
- Gas Exhaust Speed: 4L/S
- Sound: 70db
- [MATERIAL]– Vacuum Oven: Dual-layer tempered glass window, clear to watch. Polished stainless steel chamber, big size: 16.3 X 14.5 X 13.5″
- [DIGITAL CONTROL]–Micro-computer controlled vacuum drying box, keep high accuracy. Temperature setting, with LCD display screen. Have timer function
- [FUNCTION] –Vacuum Oven: Infuse inert gas into inner chamber, non-oxidation of the whole process: storage, heating, drying. Equip with vacuum gauge for safe operation. Vacuum Pump: Used to pump gas to sealed chamber, can also be used alone or as a fore pump, diffusion pump, and molecular pump etc
- [APPLICATION] — Compact size, very easy to carry & move, suitable for lab research workings
Lab Vacuum Drying Oven W/ Pump 4L/s Speed
This listing is to introduce you a premium vacuum drying oven with vacuum pump set. It can greatly improve lab drying efficiency and save time. A necessity for research center or lab us
Vacuum Drying Oven
Micro-computer controlled vacuum drying box, keep high accuracy
Dual-layer tempered glass window, clear to watch
Infuse inert gas into inner chamber
Silica gel seal rings, ensure high vacuum inside
Polished stainless steel chamber, big size: 16.3 X 14.5 X 13.5″
Non-oxidation of the whole process: storage, heating, drying
Temperature setting, with LCD display screen
Have timer function
Equip with vacuum gauge, oil-filled for accurate & durable
Faster heat, unparalled chamber temperature uniformity: +/- 0.5ºC temperature variation
Vacuum Pump
Used to pump gas to sealed chamber, can also be used alone or as a fore pump, diffusion pump, and molecular pump etc.
Compact size, portable to carry
Quite powerful, 1400rpm speed with 4L/s gas exhaust
Support constant working, when inlet gas pressure is <>
Specification
Vacuum Drying Oven
Input: 110V
Power: 1400W
Temperature Ratio: 0.1ºC
Temperature Variation: +/-0.5ºC
Degree of Vacuum: 133Pa
Chamber Size: 16.3 X 14.5 X 13.5″
Chamber Material: Stainless Steel
Vacuum Pump
Input: 110V
Gas Exhaust Speed: 4L/S
Ultimate Pressure: 6X10-2Pa
Rotating Speed: 1400rpm
Gas Inlet Port Size: φ19
Oil Volume: 550ml
Motor Power: 0.55KW
Sound: 70db
Package Content
1 X Vacuum Drying Oven
1 X Vacuum Pump
1 X User Manual
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
WILLHI WH-1803B High Temperature Controller Upgraded Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control
- 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
- 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
- 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
- 【High and low temperature alarm】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
- 【Widely Applied】 – The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat，pet breeding，incubation，HVAC equipment, accelerating germination，electric radiator, electric oven，fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
Etekcity 1022D Dual Laser Digital Infrared Thermometer Temperature Gun Non-contact -58℉~1022℉ (-50℃ ~ 550℃) with Adjustable Emissivity & Max Measure for Meat Refrigerator Pool Oven
- BETTER ACCURACY: Dual-laser targeting technology makes it easier to visualize the area being measured by an IR thermometer, resulting in higher precision ≥100°C±2% / ≤100°C±2°C versus a single laser. The Distance to Spot Ratio is 12:1
- Measure surface temperature ranging from -50°C~550°C （-58°F~1022°F)
- ADJUSTABLE EMISSIVITY: Emissivity is the measure of an object’s ability to emit infrared energy. Emitted energy indicates the temperature of the object. Adjustable emissivity improves measurement accuracy across different surface types, just regulate the emissivity of your 1022D according to the instruction（0.1-1.0）
- MULTIFUNCTION: 1022D features with Maximum measure function
- The LCD screen is back-light, it also has an Auto-Off function and a low battery indicator to extend the battery life so you never accidentally run out of juice (battery included)
- VERSATILE DESIGN: Infrared Technology makes this thermometer safely measure surface temperatures above boiling points and below freezing points from a distance while still maintaining accuracy without contact. Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
- NOTE: For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
- Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct. FDA, FCC, CE approved
- Class 2 laser, optical power 0.3-0.49mW
- 1 year warranty (with the option to extend it by 1 extra year for free) by Etekcity
Temperature measurement has never been simpler!
This Infrared Thermometer tackles the toughest jobs with ease thanks to a weather and scratch resistant UV paint coating, covering a scratch resistant polished plastic. Just by one press of the trigger, this thermometer will turn on, the laser pointer shows target and the big LCD will read the temperature in less than 0.5 second.
Features & Specifications:
1. Measurement Range: -50°C~550°C (-58°F~1022°F)
2. Storage Temperature: -20 to 50°C (-4 to 122°F)
3. Operating Temperature: 0 to 50°C (32 to 122°F)
4. Accuracy:±2% /±2°C
5. Adjustable Emissivity: 0.1-1.0
6. Resolution: 0.1°F /°C
7. Distance to Spot Ratio: 12:1
8. Selected Thermometer units: ° C /° F
9. Response Time: < 500ms
Package Included:
1x Etekcity Lasergrip 1022D Thermometer
1x 9V DC Battery
1x User’s Manual
Note:
1. This thermometer cannot test the temperature of target objects through across the glass. Besides, the steam, dust, smog will lower the accuracy of testing.
2. To make better accuracy, cover the surface to be measured with masking tape or flat black paint.
110V Blast Drying Oven Laboratory Silent Constant Temperature Oven Intelligent Digital Display Drying Electromechanical Oven
- Used:Widely used in industrial/agricultural production, scientific research, medical and health units, such as laboratory to try drying, heat treatment and heating.
- Introduction:This Digital Drying oven is a blast and constant temperature electric heating drying oven, which has a digital display. It is in accordance with ergonomic clasp handle, convenient operation, and ensure the sealing property.
- Safety:Using the intelligent PID control technology, the system has temperature control, timing, over temperature alarm function.
- Expand:Adjustable vent hole at the top, which can be expanded into the residue of the aging test
- Quality:High temperature silicone rubber is used as the sealing door. High temperature heat pipe is used as heating element to ensure safe and long life.
- Feature
- The 101-1 series drying boxes are designed with strong convection air ducts and side centrifugal wind wheel design to ensure continuous circulation of wind power.
- This series of drying ovens is designed with a reinforced keel and a reinforced sheet at all four corners. Even if the temperature reaches 250 degrees or above, the cabinet will not be deformed.
- The whole shell adopts electrostatic spraying technology, which can achieve ten years of no rust, environmental protection and practicality.
- Steps
- 1. Open the door, put the items that need to be dried on the partition inside the box, close the door, adjust the vent hole at the top of the instrument to the required state, and make appropriate according to the temperature of the dried item during the drying process. Adjustment.
- 2. Connect the power supply that requires the same equipment as the device, and ground the ground terminal of the power socket you are using.
- 3. Turn on the power switch and heating switch, the indicator light is on, the instrument starts to work, and the temperature control meter starts to display the temperature of the studio.
- 4. According to the temperature of the dried goods, you need to set the required temperature.
- 5. The instrument can turn on or off the fan cycle as needed. It must be noted that the device cannot be turned off during the heating process to avoid excessive aging of the heating components.
- 6. Turn off the power and heating switch of the equipment after the work is finished. It is recommended to wait for the equipment to cool before opening the door to deal with the problem.
- 7. It is recommended to use the device for self-tuning and temperature control for the first time to ensure accurate and safe use.
ThermoPro TP50 Digital Hygrometer Indoor Thermometer Humidity Monitor with Temperature Humidity Gauge
- 【Air Comfort Indicator】Humidity meter with humidity level icon indicates air condition — DRY/COMFORT/WET
- 【High & Low Records】Hygrometer digital thermometer displays high and low temperature & humidity records
- 【Healthier Home】Thermometer hygrometer with temperature and humidity monitor ensures proper indoor humidity control has important skin, allergen and other health benefits
- 【Smart Design】Room thermometer indoor features tabletop and magnet-mountable design
- °F/°C Selector
- Powered by AAA battery (included)
- 【1 YEAR WARRANTY! REGISTER your product after purchase and RECEIVE EXTENDED 3 YEARS Warranty】ThermoPro US Based Customer Service (Phone & Email) 5 Days a Week, reach us at 877-515-7797
Digital Bench-top Compact Constant-Temperature Laboratory Incubator, 18L/0.63 Cu ft, RT+5-65℃, 180W, 110V
Mophorn Vacuum Oven 0.9Cu Ft Vacuum Drying Oven Dual-Layer Tempered Glass Window Lab Vacuum Drying Oven with LCD Display Screen Vacuum Oven with 9cfm Pump Low Noise
- [PARAMETER]–Vacuum Oven:Input: 110V
- Power: 1400W
- Temperature Variation: +/-0.5ºC
- Vacuum Pump:Motor Power: 0.55KW
- Oil Volume: 550ml
- Rotating Speed: 1400rpm
- Gas Exhaust Speed: 4L/S
- Sound: 70db
- [MATERIAL]– Vacuum Oven: Dual-layer tempered glass window, clear to watch. Polished stainless steel chamber
- [DIGITAL CONTROL]– Micro-computer controlled vacuum drying box, keep high accuracy. Temperature setting, with LCD display screen. temperature Ratio: 0.1℃, variation: +/-0.5℃. Have timer function
- [FUNCTION]– Vacuum Oven: Infuse inert gas into inner chamber, non-oxidation of the whole process: storage, heating, drying. Equip with vacuum gauge for safe operation. Vacuum Pump: Used to pump gas to sealed chamber, can also be used alone or as a fore pump, diffusion pump, and molecular pump etc.
- APPLICATION – Compact size, very easy to carry & move, suitable for lab research workings
Vacuum Oven 1400W Vacuum Drying Oven Dual-Layer Tempered Glass Window Lab Vacuum Drying Oven with LCD Display Screen
vacuum drying oven with vacuum pump can greatly improve lab drying efficiency and save time. A necessity for research center or lab use.
Feature
Vacuum Drying Oven:
1. Micro-computer controlled vacuum drying box, keep high accuracy.
2. Dual-layer tempered glass window, clear to watch.
3. Silica gel seal rings, ensure high vacuum inside. Infuse inert gas into the inner chamber.
5.Polished stainless steel chamber, big size: 11.8″X 11.8″X 10.8″.
6.Non-oxidation of the whole process: storage, heating, drying.
7.Temperature setting, with the LCD display screen.Have the timer function.
8. Equip with a vacuum gauge, oil-filled for accurate & durable.
Vacuum Pump:
1. Used to pump gas to the sealed chamber, can also be used alone or as a forepump, diffusion pump, and molecular pump etc.
2. Compact size, portable to carry.
3. Quite powerful, 1400 rpm speed with 4L/s gas exhaust.
4. Support constant working, when inlet gas pressure is ＜1.3103Pa.
Specifications
Vacuum Drying Oven: Input: 110V
Power: 1400W
Temperature Ratio: 0.1℃
Temperature Variation: +/-0.5℃
Degree of Vacuum: 133Pa
Chamber Size: 11.8 X 11.8 X 10.8″
Chamber Material: Stainless Steel
Vacuum Pump:
Gas Exhaust Speed: 4L/S
Ultimate Pressure: 6X10-2Pa
Rotating Speed: 1400rpm
Gas Inlet Port Size: φ19
Oil Volume: 550ml
Motor Power: 0.55KW
Sound: 70db
Package Content
1 X Vacuum Drying Oven
1 X Vacuum Pump
1 X User Manual
DC Power Supply Variable, Switching DC Regulated Power Supply with 4 Digital LCD Display (0-30V/0-5A), Reverse Polarity/High Temperature Protection, 110V/115CM Alligator Leads Included – MDC01
- ▲HIGHER PRECISION WITH DATA HOLD FUNCTION – It is more precise to switch between coarse and fine tuning only by pressing one adjusting knob lightly from 0 to 30V, 0 to 5A. To press two knots 3 seconds simultaneously for holding a set of values and then press 3 seconds to release
- ▲4 DIGITS READINGS WITH BACK-LIT LED DISPLAY – With a 0.01V and 0.01A resolution, 4 digits provide more accurate and clearer visible readout for the voltage and current value, extremely durable and easily visible even in low-light usage, meeting the needs of most people, ideal for small labs or the hobbyist at home
- ▲HIGH-QUALITY WITH ESSENTIAL SAFETY – Grounding wire, thermal protection, voltage overload and short-circuit protection ensure the safety
- The built-in fan reduce the operation noise, prolonging the life of product effectively
- ▲CONSTANT VOLTAGE & CURRENT OPERATION MODE – Easy to dial in the desired voltage with the encoded-controlled fine and coarse adjustment knob, can easily see the amperage and voltage change as circuit components are switched in and out
- ▲WHAT YOU GET – 1 x MDC01 Power supply host , 1 x Output power cord , 1x Input power cord , 1 x User manual
Fristaden Lab SH-2 Magnetic Stirrer Hot Plate Mixer | 100~1600rpm Stirring Speed | 350°C Temperature | 2,000mL Capacity | Lab Quality Hot Plate Stirrer for Liquid Heating and Mixing
- POWERFUL HEATING: The Fristaden Lab SH-2 Magnetic Stirrer Hot Plate has a powerful, 180W heating element with 49-350℃ temperature range. The aluminum plate enables even heat disbursement and can hold up to 2000mL of liquid volume. The stirrer includes an adjustable temperature sensor bracket that easily mounts to the back of the machine.
- FLEXIBLE STIRRING SPEED: The magnetic mixer has a 100-1600rpm speed range that’s flexible and easy to control depending on your project’s needs. The stirrer’s strong magnetic field holds the stir bar firmly in place.
- DUAL ANALOG CONTROLS: The hot plate mixer has dual analog controls and can independently control heating and stirring for more precise results. The stirring and heating elements can be used together or by themselves, giving you even more control over your projects. The machine can work continuously up to 4 hours on high and 8 hours on low and has a liquid heating time of 20-30 minutes.
- LAB QUALITY: The Fristaden Lab magnetic stirrer hot plate mixer is built from lab quality materials. The design is strong and study and built to last. The machine includes a magnetic stir bar
- an extra fuse
- an adjustable temperature sensor bracket
- a USA power cord
- and an easy-to-understand user manual for fast and easy set-up.
- TRUSTED SELLER: Fristaden Lab is an American lab equipment company. The SH-2 hot plate stirrer has a 1 Year Warranty. Questions? Our professional customer service is ready to help.
Conclusion
By our suggestions above, we hope that you can found lab oven controlled temperature for you.Please don’t forget to share your experience by comment in this post. Thank you!
