Best On Demand Gas Hot Water Heater

Please Note:

1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.

2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.

3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.

4、Please use only liquid propane as fuel and use it in a well-ventilated place.

5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.

6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.

7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

Saves energy, saves water! Marey Power Gas 10L Tankless Water Heater requires NO electricity to deliver endless hot water! It’s simple to install and requires no electricity to operate. Energy-saving design heats up in seconds and uses gas only while water is flowing. Available in LP and natural gas models. Adjustable gas and water controls; Electric pulse ignition powered by 2 D-cell batteries (not included); Activates by water flow when faucet is turned on; Rust-proof… no water loss due to leaks; Anti-combustion and gas pressure safety protection; Works easily with low levels of water pressure; Applicable water pressure: 3.6 – 145.0 psi; Hot water output per minute: 3.1 gallons; Energy efficiency: 54% – 87%; Exhaust discharge mode: Flue duct type; Gas Types: Liquid Propane Gas, Natural Gas; Dimensions: Approx. 24″ x 14″ x 7″; Weight: Approx. 21 lbs.; Mfg. Number: GA10LP (Liquid Propane Gas), GA10NG (Natural Gas); Marey Gas 10L Tankless Water Heater

V53DeP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

Rheem RTG is a series of mid-efficiency condensing tank less gas water heaters designed for continuous hot water. Industry leading low flow activation with a minimum flow rate of . 26GPM and minimum activation flow rate of . 40GPM ensures hot water is received even in low demand situations. Ultra Low NOx burner meets SCAQMD rule requirements of safety with low emissions. While our exclusive Guardian Overheat Film Wrap prevents our units from reaching the dangerous temperatures others can. Add in our maintenance notification settings, self-diagnostic system and Eco Net enabled mobile app feature (additional kit available), buying the Rheem RTG tank less water heater makes perfect sense. Included are a digital remote control and 10ft. of thermostat wire. As this unit is for use outdoors no venting is required. Best if used with up to 3 bathrooms; . 82UEF (. 82EF Canada) efficiency.

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it’s perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

Enjoy easy access to hot water during your next outdoor adventure with the Coleman Hot Water on Demand H2Oasis Portable Water Heater. Ideal for washing dishes, bathing, or preparing hot beverages, this propane-powered water heater dispenses hot water at temperatures up to 125 degrees Fahrenheit. Simply fill the included 5-gallon water carrier with drinkable water, connect it to the pump, twist the dial to the desired temperature, and wait as the water heats up in as little as 30 seconds. The unit’s Instastart ignition allows you to light the heater with the push of a button, while PerfectFlow technology helps ensure a steady heat output. The H2Oasis also features a shower head to help you maintain personal hygiene while camping or backpacking. Equipped with a high-power submersible electric pump and brass hose fittings, the water heater maintains robust, reliable water flow even amidst harsh conditions. Its intuitive LED display provides a clear readout of heating status. And thanks to its mesh storage bag, this portable water heater is easy to carry around the campsite or trail.

Conclusion

By our suggestions above, we hope that you can found on demand gas hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!