justyoumarket 
Nowadays, there are so many products of rv 6 gallon hot water heater electric element in the market and you are wondering to choose a best one. You have searched for rv 6 gallon hot water heater electric element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rv 6 gallon hot water heater electric element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
16,540 Reviews Scanned
Camco Hot Water Hybrid Heat Kit – Easily Converts Any 6-Gallon RV LP Gas Water Heater to 120V Electricity to Conserve Propane (11673)
- Converts any RV LP gas water heater to 120v electricity on demand
- Includes on/off power switch with mounting bracket and fully adjustable thermostat
- All necessary power cords and color-coded wire assemblies are included
- For 6 Gallon RV water heaters
- 425W element measures 6.25” long
With the RV Hot Water Heater you can convert your gas unit into an electric one and save the propane for your barbecue. It converts any 6-gallon RV LP gas water heater to 120 volts of electricity on demand and has a stainless steel cartridge that heats the water to temperatures ranging from 90 to 150 degrees Fahrenheit. This water heater conversion kit includes an on/off power switch with a mounting bracket and a fully adjustable thermostat for both convenience and safety. A 15 A/120 V electrical service is required to use this water heater, which includes a kit with all necessary power cords and color-coded wire assemblies to make setup quick and easy. This 6 gal RV water heater’s thermostat comes factory preset to 120 degrees Fahrenheit and might require adjustment, depending on your system.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Camco 02482/02483 1650W 120V Screw-In Water Heater Element – High Watt Density
Product Description
1650W, 120V, Water Heater Screw-In Element, Use For 6 Gallon Water Heaters.
From the Manufacturer
Camco’s 1650W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Reliance 6 6 SOMS K 6 Gallon Compact Electric Water Heater
- Ideal for under counter or crawl space installation
- 6 gallon short, 6 year warranty, electric.
- Single 120 volt 1650 watt copper heating element.
- Side mounted cold water inlet and hot water outlet for easy installation.
- Factory installed Temperature and Pressure, T&P relief valve
Product Description
606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1″ foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.
From the Manufacturer
Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.
Thermoflow UT10 2.6-Gallons Electric Mini-Tank Water Heater, 1.5kW at 120 Volts
- ➤ 2.6 GALLON CAPACITY – 2.6 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.Stainless steel tank and heating element designed for efficiency, durability and easy replacement.
- ➤ THERMOSTOP FUNCTION – Low stand-by loss power consumption. The Thermoflow UT10 with Advanced Thermostop Technology of Germany, when the water heater reaches a high or low set temperature,it’ll stop heating or reheating automatically.
- ➤ EPS FOAMING TECHNOLOGY – Heating water quickly,fast recovery rate eliminates long waits for hot water at your sink.
- ➤ SAFETY – Active protection circuit for safe installation. If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase &
- installation. Dimensions: 18H x 12.2W x 11D inches
- Weight: 14 lbs
- Water connections :1/2 inch NPT, Electrical requirements: 1.5 kW, 120 volts. Operating pressure : 150PSI.Nominal current: 13A .
Atwood 92249 Electric Water Heater Replacement Parts – 110 VAC Element/Gasket Kit
Atwood 92249 Electric Water Heater Replacement Parts – 110 VAC Element/Gasket Kit. Atwood Mobile Products, LLC has been a world leader in designing, engineering and manufacturing appliances and hardware for the RV industry for over 30 years. Whether it’s our constant drive for innovation and improvement or our unwavering commitment to our customers it’s no coincidence that Atwood Mobile Products, LLC has found itself an integral part of the RV industry for now and many years to come.
Thermoflow Elex 5.5 Tankless Water Heater Electric for Wash Basins & Utility Sinks, 5.5kW at 240 Volts
- ➤ TANKLESS – Save up to 60% on your water heating cost with an Thermoflow electric tankless water heater .Distribution, start-up and technical systems losses as well as circulation and storage losses are eliminated.
- ➤ ENDLESS HOT WATER – No need to preheat before using.As soon as you open the tap, the water flows with your desired temperature.High efficient,saving energy.
- ➤ COMPACT DESIGN – Super compact designed, even smaller than a shoe box .Wall-mounted design frees up floor space for more storage, easy to install into washbasin and other tight spaces!
- ➤ EXCEPTIONALITY DURABLE – Instant hot water thanks to rapid and maintenance-free bare wire heating systems. High quality alloy bare heating element has good corrode resistance and acid-resisting,with longer lifespan, instantaneous heating efficiency up to 99%.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase & installation. Dimensions: 7.6″ x 5.4″ x 2.6″
- Weight: 1.8 lbs
- Pipes fittings :1/2” NPT, Electrical requirements: 5.5 kW, 240 volts, Nominal pressure: 90PSI. Nominal current:23A. Required breakers:1 x 2-POLE 30AMP. Required wire: 1 x 12 AWG . ( Breakers and wire are NOT included )
Diamond Group DGR6VP Diamond HR6 Hott Rod Conversion Kit – 6 Gallon
The most effective water heater conversion kit in the RV aftermarket, the Hott Rod converts your LP water heater to an electric operation while keeping your LP system intact. Rated at 400 watts and drawing only 4 amps, the 6 gallon Hott Rod will provide a faster recouping system and provide free hot water while utilizing a camp site hook up. UL Listed and CSA approved, the Hott Rod has a limited lifetime warranty and typically installs in less than an hour.
Eleventree 2 Pack RV Water Heaters Magnesium Anode Rod, Extends the Life of Suburban and Mor-Flo Water Heaters Tank–3/4"NPT threads 9.25 length-2pack
- Corrosion Protection: Extends the life of a water heater by attracting corrosive elements in the water. The exclusive suburban anode rod absorbs the corrosive action acused by hot water and prolongs the life of your water heater tank.
- Size and Material Typle: Magnesium anode rod, 9.25″ long,¾” threads , Uses a 1-1/16’’ socket
- Reliable quality：High quality rv hot water tank anode rods are a perfect replacement for suburban 232767 and Mor-Flo 6 Gallon water heater anode rod.
- Pack of 2: Unscerw the anode rod to drain the tank. If the rod is mostly eaten away, replace with a new one. Always keep a spare in your RV.
- Fast delivery: Fulfillment by Amazon,Eleventree provide the best quality product at the best possible price.We provide the best quality product at the best possible price. guaranteed reply within 24 hours and a 30-day money-back guarantee our customer service is unmatched.
Conclusion
By our suggestions above, we hope that you can found rv 6 gallon hot water heater electric element for you.Please don’t forget to share your experience by comment in this post. Thank you!
