justyoumarket 
Nowadays, there are so many products of under av cooling fan in the market and you are wondering to choose a best one. You have searched for under av cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings under av cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
AC Infinity AIRPLATE S5, Quiet Cooling Fan System 8" with Speed Control, for Home Theater AV Cabinets
- An ultra quiet fan system designed for cooling cabinets that requires minimal noise.
- Features a multi speed controller to set the fans speed to optimal noise and airflow levels.
- Contains a CNC machined aluminum frame with a modern brushed black finish.
- Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25 percent.
- Dimensions: 8.5 x 4.4 x 1.3 in. | Total Airflow: 52 CFM | Total Noise: 18 dBa | Bearings: Dual Ball
AC Infinity AIRPLATE S1, Quiet Cooling Fan System 4″ with Speed Control, for Home Theater AV Cabinets
- An ultra quiet fan system designed for cooling cabinets that requires minimal noise.
- Features a multi speed controller to set the fans speed to optimal noise and airflow levels.
- Contains a CNC machined aluminum frame with a modern brushed black finish.
- Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25 percent.
- Dimensions: 4.6 x 4.6 x 1.3 in. | Airflow: 26 CFM | Noise: 17 dBA | Bearings: Dual Ball
AC Infinity AIRPLATE S9, Quiet Cooling Fan System 18" with Speed Control, for Home Theater AV Cabinet Cooling
- An ultra-quiet fan system designed for cooling cabinets that requires minimal noise.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Contains a CNC machined aluminum frame with a modern brushed black finish.
- Powered by wall outlet or USB port, included Turbo Wall Adapter increases performance by 25%.
- Dimensions: 17.5 x 6.1 x 1.3 in. | Total Airflow: 156 CFM | Total Noise: 21 dBA | Bearings: Dual Ball
Fugetek 12V DC Brushless Blower Cooling Fan, HT-07530D12, 75x75x30mm, 2pin, Dual Ball Bearing, Computer Fan, Multi Use, Black, US Support
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Dual Ball bearing. Genuine NSK or NMB balls made in Japan. Guaranteed to continuously run 50,000 hours under normal temperature. Speed: 3500 RPM
- Rated Voltage: 12 V
- Noise Level : 42 dba
- Dimensions:: 75x75x30mm
- 2.95×2.95×1.18″
- Lead wire:UL Type (+):Red (-):Black. This is a two wire blower.
Universal 12v DC Brushless Blower Cooling Fan – Dual Ball Bearing
General Specifications:
Frame: Plastic 94V-0
Impeller: Plastic 94V-0
Lead wire: UL Type (+):Red (-):Black
Operation Temperature: -10℃~ 70℃
Motor Protection: Impedance Protected
Reverse Polarity Protected
Model No: HT 07530
Rated Voltage (VDC): 12
Speed Type: H, M, L
Rated Current (A): 0.30, 0.16, 0.12
Rated Speed _RPM): 3500, 3000, 2500
Air Flow (CFM): 12.02, 9.40, 7.81
Air Pressure (mmAg): 16.81, 9.30, 5.96
Customer Support from our Houston,Tx office. If you have any questions, feel free to call us.
Coolerguys Quiet AC Powered Receiver/Component Cooling Fan Kits (120mm)
Silent and simple, just plug in and place on or near the component that needs cooling, uses standard 110v AC 2 prong outlet for power but uses a reliable yet quiet DC fan.
Comes with (4) rubber feet to keep the fan from moving and scratching components.
Help prevent your receiver, dvr, console or other component from overheating which can lower life expectancy.
As always all of our parts come with a 3 year replacement warranty, the fan uses dual ball bearings which have a 50,000 life expectancy @ 40C (104F) which equates to nearly 6 years of continuous usage
Fan has 12″ tail, power supply has 48″ so you can place the fan upto 60″ (5ft) away from the AC outlet
Includes:
Coolerguys Ultra Quiet 120x25mm 5 Volt Fan with 4pin Connector : 840556087908
(4) Adhesive backed rubber pads : 840556096917
CG 110V AC to 5V DC Power Supply with 4 Pin Molex (500mA) 4ft power cord: 840556087885
(4) Nylon Multi-Purpose zip ties Black
Fan Specifications:
Dimensions 120x120x25mm
Voltage: 5VDC
Current: 0.23A / 1.15W
Max Static Pressure: 1.85mmH2O
Connector: 4 pin
RPM: 1200 +/- 10%
Air Volume: 45.2 CFM
dB: 19.7
Bearing: Dual Ball
Life Hours: 50,000 @ 40C
Tail is 12 inched wrap sleeved 2/wire.
Not compatible with our thermal control units
Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Cabinet Air Control 12-Volt Trigger-Controlled Multi-Speed AV Cooling Fans, for Home Theater Cabinets
- This cooling system is designed to be mounted in your stereo or home theater equipment cabinet. It will quietly exhaust the hot air outside, or pull cooling air into the cabinet, or both — you choose how it is set up. It has two fan units, each with 2 high-quality, low-noise 80mm fans mounted together (4 fans total).
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fan at any one of 5 speeds. Please consult your component’s manual for details about how its 12v trigger operates.
- The fan units are connected by a 2-way power distribution cable, which allows you to separate the fans by up to 7 feet apart.
- The 80mm dual-fan cabinet cooling units measure approximately 4-5/8″ high x 8″ wide, which includes the mounting plate. The required hole is approximately 3-1/4″ high x 6-5/8″ wide. The unit is 1-1/4″ thick behind the mounting plate, and only requires about 1/3″ additional space behind the back of the fan to allow for airflow.
- Recommend fan speeds for this system: The two 80mm fan units (running together) are rated at 22db, while moving 112 cubic feet of air per minute (at 3/4 speed). They have approximately these specs at different speeds: 1/2 speed = 74CFM at 16db, 2/3 speed = 98CFM at 19db , and full speed = 148CFM at 25db (approximate). With component cooling, slow (and quiet) are the way to go!
OVERVIEW: This cooling system will add serious cooling to your AV or home theater cabinet. It has 4 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings. The fans are built into 2 separate dual-fan housings.
The system includes a 12 volt trigger control module, which turns the fans on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling system’s power supply to the fans.
The 5 speed power transformer plugs into any AC outlet.
The standard system comes set up so that hot air enters the front of one fan unit (intake), and exits out the back of the other fan unit (exhaust). If you need to have another setup, just let me know. You can also easily change the fan orientation later, if necessary.
THE COOLING SYSTEM INCLUDES: 2 x dual-80mm fan units, 1 x 12 volt trigger module, 1 x 2-way power distribution cable, 1 x multi-speed power transformer and mounting hardware. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, allowing easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Installation is easy, using the supplied instructions and mounting template.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
Plasma & LCD TV Vertical-Mount Cooling Fan System, with USB-Control & multispeed Fans
- This cooling unit is designed to quietly pull hot air out of your TV or video monitor. It has 2 high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings. Each fan has a mounting plate, with a rubber air-chamber ring around the bottom edge, to make sure the fan is sealed against the back of the TV. The fans are also fitted with snap-lock adhesive pads, which stick the fans to the back of your TV, yet allow easy removal and reinstallation.
- The system includes a USB control module, which turns the fans on and off, under the control of your TV’s USB port (type A connector). The USB module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fans. In addition, YOU control the fan speed, using the multi-speed fan controller.
- IMPORTANT: Please make sure that your TV’s USB port turns on (powers up) ONLY when the TV is turned on. That way, the fans will run when the TV is on and turn off when the TV is off.
- Recommended fan speeds for this system: The fans (running together at 2/3 speed) are rated at 19db while moving 98 cubic feet of air per minute, or 22db & 110CFM at 3/4 speed. With cabinet cooling, slow (and quiet) are the way to go! Other available speeds: 1/3 speed = 13db/50CFM, 1/2 speed = 16db/72CFM, Full speed = 25db/148CFM.
- Each cooling unit measures 5-1/2″ square (includes the mounting plate). The units are 1-1/4″ tall, and only requires about 1/3″ additional space for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet Fluid Dynamic bearings.
The system includes a USB control module, which detects the signal on your TV’s USB port, then sends power power from the multi-voltage transformer (included with the cooling system), to the fans.
Your TV’s USB port should turn on only when the TV is on. That way, the USB control module will only run the fans when the TV is switched on.
Includes a 5 speed power transformer, which plugs into any AC outlet.
The standard system comes set up so that hot air enters the front of the fan unit (next to the TV), and exits out the back. If you need to have the air flow reversed, just let me know. There is no extra charge for this option. You can also easily change the fan orientation later, if necessary.
THE COOLING SYSTEM INCLUDES: 2 x 120mm Mega-fan vertical-mount fan units, 1 x USB control module, 1 x 2-way power distribution cable (7′), 1 x multi-speed power transformer and mounting hardware. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, allowing easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Installation is easy, using the supplied instructions and mounting template.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AV Cabinet Digital Thermostat-Controlled Cooling Fan with Multi-Speed (White Model), for Home Theater Cabinets
- This cooling unit is designed to be mounted inside your equipment cabinet. It will quietly pull the warm air out of your cabinet and exhaust it out the back or top. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.
- The system also includes an adjustable digital thermostat. In addition, YOU control the fan speed, using the multi-speed fan controller.
- Recommended speeds: the 120mm fan is rated at 16 db at 2/3 speed, while moving 49 cubic feet of air per minute, and 3/4 speed = 55CFM at 19db. The fan has approximately these specs at other speeds: Full speed = 74CFM at 22db, 1/2 speed = 37CFM at 13db, 1/3 speed = 25CFM at 10db (approximate). With cabinet cooling, slow (and quiet) are the way to go!
- The cooling unit measures 6-1/4 square, by 1-1/2″ deep.
- This model has a white mounting plate and front grill, and stainless silver screws on the front. The back (non-visible) side is black.
OVERVIEW: This cooling unit is designed to be mounted inside your equipment cabinet or desk. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.
The system includes an adjustable digital thermostat, which is mounted on the inside of your cabinet. This thermostat can be set to display temperatures in either Fahrenheit or Celsius. It has adhesive Velcro pads on the back for mounting, and it is powered by 2 AAA batteries.
YOU control the fan speed, using the multispeed fan controller.
THE COOLING SYSTEM INCLUDES: 1 x 120mm cabinet fan unit, 1 x digital thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions. The fan can be up to 6′ from the 12v socket.
SETUP: The standard system comes set up so that hot air enters the front of the fan unit (as shown with mounting plate and grills), and exits out the back. Regular Buyers: If you need to have the air coming out the front, just let us know and we will ship it that way. Prime Buyers: Since systems are shipped directly from Amazon’s warehouses, we can’t change the fan orientation on request. However, you can also easily change the fan orientation later, using the simple instructions in your installation manual.
The system comes with instructions and a mounting template to facilitate installation. It comes completely assembled, with all components installed, wired and ready to go!
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Conclusion
By our suggestions above, we hope that you can found under av cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
