justyoumarket 
Nowadays, there are so many products of wahhing 10pcs 2mm thick heating block cotton in the market and you are wondering to choose a best one. You have searched for wahhing 10pcs 2mm thick heating block cotton in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings wahhing 10pcs 2mm thick heating block cotton which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WAHHING 10PCS 2mm thick Heater block cotton Safe Working Temp less 300°C For 3D printer Hotend
- ★Recommend Safe Working Temperature : ＜300°C
- ★You can Punch Holes or Cut fit size to the cotton.
- Heat preservation, keep heater block and consumable work better.
- Size: 3.35in/85mm x 0.8in/20mm x 0.08in/2mm (+/-0.05in)
- Package: 10 pcs * WAHHING heater block cottons.
Description
WAHHING Heating Block Cotton is manufactured from ceramic fiber paper and High Temperature Film as main raw material.
Important Safety Guide
★WAHHING Heater Block Cotton Safe working temperature: ＜300°C
★This Heater Block Cotton in normal working, may be appear some slight smoke,
and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!
★Must pay attention to the Safe working temperature of the 3D printer’s consumable and accessories, May cause high temperature hazards!!
PLA (190°C-230°C)
ABS (230°C-250°C)
Heater Block Cotton(＜300°C)
WARNING!!
►Keep away from children.
►Please read your 3D printer manual carefully before installing and using it.
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►This product is Designed for 3D printers, don’t use it outdoor and shut off power before starting installation work.
►3D printer accessories temperature can be very high, pay attention to safety!
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.
CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10
YOTINO 10Pcs 3mm Thick Heating Block Cotton 0.24in x 108ft Polyimide Adhesive Kapton Tape for Makerbot 3D Printer Hotend Nozzle
- – 3mm heat insulation cotton used for 3D printer nozzle heat preservation, keeping the printer heating evenly and work better, improving the quality of the printed matter, save electricity
- – Cotton made from ceramic fiber and high temperature film, adhesive tape made from Polyimide
- – Heating block cotton and Kapton tape are used on megathermal hotend nozzle, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 180 degrees Celsius (356 Fahrenheit )
- – Cutting the cotton into the proper size and holes as needed, and then use Polyimide tape to firmly stick together
- – Heating insulation cotton fits for all 3D printer extruder heater block offered from MK7 MK8 Makerbot RepRap , etc.
YOTINO Heating Block Cotton and Polyimide Adhesive High Temp Kapton Tape
Specification
Material: cotton and Polyimide
Heat insulation cotton: Length 70mm/2.76in, width 20mm/0.79in, thickness 3mm/0.12in
Polyimide high temp tape: Total length 30M/108ft, width 6mm/0.24in
Feature: heat preservation
Package Included
10PCS x heating block cotton
1 PCS x Kapton Tape
NOTE
1. Small parts, keep away from children
2.After replacing the nozzle, recalibrate the distance between the print head and the print plate to ensure the quality of the printed parts
3. The surface temperature of the 3D printer may be very high, being careful not to touch the heating element to prevent injury
4. Do not run the device unattended when the 3D printer is initially running
Kweiny Heat Insulation Cotton 10PCS and PTFE High Temp Tape for 3D Printer Makerbot Hotend
Heating Block Cotton 10PCS Kapton Adhesive Gold Tape 0.78in x 108ft for Ultimaker Makerbot 3D Printer-Hotend Nozzle Heat Insulation Cotton & High Temperature Resistant High Temp Tape
BronaGrand 10PCS 2mm Thick Heating Block Cotton for 3D Printer hotend Nozzle Heat Insulation
Feature:
This great replacement for when the old ceramic tape wears out. It is used for 3D printer nozzle keeping warm.
The heating insulation cotton is made from heat-resistant ceramic fiber.
the product sizes can be customized according to customer needs.
the benefit for keeping the key parts of the 3D printer – heating aluminum block warm, is making the internal temperature flat, saving power,and energy.
Size: 75mm*21*2mm +/-0.2mm;
What You Get:10 x 3d printer heating block cottons;
Safety Guide:
Keep away from small children.
This products are only suitable for 3D printer use indoors.
Please read your use guideline of the 3D printer manual carefully before installing and using it.
<3d printer="" consumable:="" pla="" (190°c-230°c)="" or="" abs="" (230°c-250°c)="">
WARNING!!
3D printer replacement parts, Always shut off power to the circuit before starting installation work.
The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
3D printer initial operation, Do not run the equipment Unattended state.
When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state.
To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product.
Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.
3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend Compatible with Creality CR-10,10S,S4,S5,Ender 3, ANET A8 Pack of 2 (Blue)
- Non-stick silicone, your print head will stay clean and this will prevent the filament from sticking to the heater block or spout.
- Can offer a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print. Actually it boost the ability to print large bosses and bridges all while keeping the hotend temperature extremely stable.
- Very useful silicone socks: will keep your heater block clean and free from burnt and blackened plastic.They not only keep the beaker clean, but also keep heat inside the hotend and off your print.
- Made of a heat-resistant, non-stick silicone material that will repel build-up from molten plastic. This really helps with sticky materials like Co-Polyesters and filled with materials that you would like to build into nozzles.
- The sock also acts as an insulator for the print head. It will reduce heat over time and help maintain a constant temperature during printing.
Specification:
Application: MK7/8/9 Heater Aluminum Block
Material: Silicone
Net weight: about 3g
Use: Anti scald, protect the heating block
High temperaturesistance: 280 degree
NOTE:
Please allow 1-3mm differs due to manual measurement.
If you have any question, please feel free to contact us
3PCS MK8 Silicone Sock 3D Printer Heater Cover Thermal Protection MK7 MK8 MK9 Hotend for Creality CR-10,10S, S4, S5, Ender 3, Anet A8,V6 3D Printer Extruder Hot End Heating Insulation Case
- Made of heat-resistant, non-stick silicone material, will repel build-up of molten plastic, high temperature resistance: 280℃.
- Helps to keep the hotend temperature extremely stable ,particularly if you use high-airflow cooling around the nozzle to cool the print.
- Can extend the life of the heater block and extruder by keeping it cleaner,also keep heat inside the hotend and off your print.
- Professional for 3D printer extruder, heated aluminum block silicone protective sleeve for MK7 MK8 MK9.
- How to use it : Push the covers onto the front of the Hot End with no disassembly – they will be a tight fit when first pushed on cold, when hot the silicone will expand to the correct size to fit the hotend snugly.
These socks will keep your nozzle clean and free of burnt on blackened plastic
helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
Features:
Durable and capable of working long time without replacement, will not get loose or come off
Helps to stabilize printing temperature and reduces heat radiation
Faster heat-up
Cleaner heater block
Safe to touch when heated up, will not burn your fingers
Package contents:
3 x Hotend Silicone Sock
HWA KUNG 2pcs Heated Bed Foil Self-Adhesive Insulation Cotton Mat 300mmx300mm Waterproof Thermal Insulation Mat for 3D Printer Heatbed Parts Compatible with CR-10 Reprap Ultimaker Makerbot,Black
- Suitable temperature: – 50℃ to 150℃ (-58℉~302℉)
- Advantage:soft, cold-resistant, heat-resistant, waterproof, low thermal conductivity, shock absorption, sound absorption, etc.
- This sheets can be easily cut down to desired size by scoring with a utility knife.
- Self-adhesive insulation Foil is is directly pressed from aluminum, very high ignition point, Non-toxic and tasteless, high anti-blasting performance and strong puncture and tear resistance, good heat sealing performance.
- 3D printer heating bed heat insulation and noise blocking accessories，apply to 3D printer heated bed, aluminum substrate, PCB hot bed, silicone hot bed bottom
HWA KUNG 2pcs 3D Printer Heated Bed Foil Self-Adhesive Insulation Cotton Mat
Parameter:
Size:300mmx300mm（11.81×11.81in）
Colour:silver surface，internal black
Thickness:about 10mm
Weight:122g
Advantage:
Soft, cold-resistant, heat-resistant, waterproof, low thermal conductivity, shock absorption, sound absorption, etc.
Packing list:
2pcs x Heated Bed Insulation Cotton
ET 2 PCS 3D Printer Platform Hot Bed Insulation Cotton Lightweight Foam Foil Self-Adhesive Insulation Mat Sticker Hotbed Thermal Pad Compatible with Creality Ender 3 Anet E12 Anet A8 (220mm)
- Application: 3D printer hot bed,reducing the heat and cold loss. Available on 220*220/214*214/200*200/300*300mm aluminum substrate, PCB hot bed, silicone hot bed bottom
- This product is a closed-cell elastic material, which has excellent properties such as softness, resistance to bending, cold resistance, heat resistance, water resistance, low thermal conductivity, shock absorption and sound absorption
- Suggestion Temperature: – 50℃ to 150℃ (-58℉~302℉).Thickness:10mm,provides good insulation for your hot bed
- Strong sound insulation and absorption performance, heat-resistant, fire preven, durable, healthy, cold-resistant, waterproof, low thermal conductivity, shock absorption and antisepsis
- The wrinkles on the surface of the product will not affect the function of the cotton
USAGE:
Clean the bottom of the hot bed before use, and tear the adhesive back to the bottom of the hot bed.
Please allow 0-2mm error due to manual measurement.
Conclusion
By our suggestions above, we hope that you can found wahhing 10pcs 2mm thick heating block cotton for you.Please don’t forget to share your experience by comment in this post. Thank you!
