Best Werner Multiposition Ladder 225 Lb

Product Description

Lightweight aluminum stepladder industrial duty capable of supporting 225 pounds. Equipped with molded top with recessed tray, slip resistant rubber feet, pail shelf and side rails. This product is a stepladder.

From the Manufacturer

A Louisville 6-foot medium duty aluminum stepladder with a 225 pound capacity. Molded top with parts tray. Molded top provides exceptional stiffness and rigidity. in addition, the top has a recessed parts tray and tool slots. Pinch resistant spreader braces, heavy duty plated steel spreader braces with double rivet hinge protect user from pinched fingers. Steel backup washers and reinforcing back plates prolong life at pivot points. Molded pail shelf, self-closing, structural molded pail shelf. Non-skid surface and outer retaining edge provide additional features. Slip resistant rubber feet, aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Rubber tread can be replaced when necessary. Side rails, aluminum side rails are full channel extrusions on the front and modified channel on the back legs.

This non-conductive Louisville Ladder 6′ Fiberglass Ladder is essential for tasks related to electrical maintenance, indoors and out, at home or at the jobsite. It can be used to change light bulbs or access roofing and much more. The ProTop has multiple slots for holding power and hand tools, paint cans and other items. It also comes with a paint pail hook. This home ladder has slip-resistant rubber feet and deep, slip-resistant aluminum steps, which are riveted in channels for increased stability. An additional pinch-resistant spreader brace ensures that this product stays in place when you are climbing it. It is easy to use and can be stored in a garage or up against the house when the job is finished. Every Louisville aluminum ladder created in this style is ANSI Type 2 rated to hold a maximum of 225 lbs of tools and people combined. You can feel safe using it, knowing that it meets or exceeds OSHA and ANSI requirements.

Product Description

Stepladder, Material Aluminum, ANSI Type II, Ladder Height 6 ft. , Load Capacity 225 lb. , Number of Steps 5, Base Spread 41-5/8 In. , Bottom Width 21-1/2 In. , Step Depth 3 In. , Step Tread Ribbed, Series 350, Includes Pail Shelf

From the Manufacturer

This light duty aluminum stepladder has a duty rating of 225 pounds (type III). It has a molded Tool-Tra-Top, convenient tray for tools/paint can and slots for paint roller tray with a handy paint can hook on the back of the top. Features include external pinch-proof spreaders, slip-resistant Traction-Tred steps and bottom and top step braces. Spill-proof pail shelf with rag rack holds gallon cans of paint.

Product Description

Non-conductive fiberglass commercial stepladder has duty capable of supporting 225 lbs. Equipped with slip resistant rubber feet. Non-conductive structural molded top with tool slots help keep tools close at hand. Optional molded pail shelf. Non-conductive fiberglass commercial 4-foot stepladder with curved front of top for leg comfort. Duty capable of supporting 225 lbs. Equipped with slip resistant rubber feet and the PROTOP, a non-conductive structural molded top.

From the Manufacturer

Louisville Ladder four foot medium duty aluminum stepladder with a 225 pound load capacity. Now features Louisville exclusive “Pro Top” designed with innovative features to improve the user’s performance when working electrical and residential jobs. Pro top includes a magnet tray, hardware tray, curved ergonomic front, drill and tool slots, paint bucket holder, and a pipe or 2×4 holder to increase productivity and extreme durability. This ladder features slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure-footing. Pinch resistant spreader braces, heavy duty plated steel spreader braces with double rivet hinge protect user from pinched fingers. Meets OSHA, CSA and ANSI standards.

Product Description

Extension Ladder, Material Aluminum, Industry Ladder Size 24 ft. , Max. Working Length 21 ft. , ANSI Type II, Load Capacity 225 lb. , Section Length 12 ft. , Adjustable Increments 12 In. , Outside Shoe Base Width 17-1/2 In. , D1200-2 Series, Rail Type Interlocking, Shoe Design Dual Action Shu-Lok(r), Includes Mar Resistant End Caps

Amazon.com

Designed for medium-duty use, the D1200-2 Series Aluminum D-Rung extension ladders are ideal for home repair and light-duty jobs. Lightweight aluminum construction makes the ladders easy to transport and set up. These ladders feature the patented ALFLO rung joint that ensures stability while you work. So whether you’re cleaning gutters, washing windows, or painting, your D1200-2 Series ladder will provide a sturdy and reliable work surface.

D1200-2 Series Aluminum D-Rung Extension Ladders At a Glance: 225-pound load capacity Mar-resistant end caps ALFLO rung joints Smooth-operating pulley Interlocking side rails Strong modified I-beam rails Slip-resistant Traction-Tred D-rungs Spring-loaded locks operate smoothly Shoe rests flat or is held in spur position with Shu-Lok feature

Traction-Tred D-rungs are slip-resistant for a safe climb and descent.

The ladder’s Shu-Lok slip-resistant feet feature a spur end for use on soft ground.

Type II Extension Ladders are Built for Stability and Comfort
All Werner D1200-2 Aluminum D-rung extension ladders have a Type II duty rating, which means the load capacity is 225 pounds. This duty rating includes the combined weight of the user and materials. Each ladder features 1-3/4-inch slip-resistant D-rungs that provide a flat, comfortable standing surface.

Twist-Proof Performance and Shu-Lok Feature
D1200-2 Series ladders feature the patented ALFLO rung joint that is designed to keep the ladder from twisting while in use. Additionally, each ladder’s foot design includes a spur for use on soft ground. The Shu-Lok feature holds the foot in position.

Durable and Easy to Use
Werner D1200-2 Series ladders are easy to extend thanks to interlocking side rails, spring loaded locks, and smooth-operating pulleys (model D1216-2 is not equipped with rope and pulley).

For durability, the I-beam rail architecture strengthens the aluminum rail. Each ladder also has mar-resistant end caps that help preserve the ladder and the surface the ladder leans against.

About Werner: The Pros’ Choice
Werner, the most trusted name in ladders, is preferred by pros more than any other brand. For over 60 years, pros have looked to Werner to supply their climbing equipment needs. Werner manufactures a full line of safe, professional-grade products for any job, and it builds its products to withstand even the most challenging tasks–that’s why Werner ladders are found on more jobsites than any other brand.

What’s in the Box
Aluminum D-Rung Extension Ladder.

Model Number Total Length Sections (feet) Maximum Working Length (feet) Approximate Cubic Feet Per Unit Approximate Shipping Weight (pounds) D1216-2 16 13 5.8 22 D1220-2 20 17 7.2 27 D1224-2 24 21 8.6 33.5 D1228-2 28 25 10 43 D1232-2 32 29 11.5 54 D1236-2 36 32 13 62.5 D1240-2 40 35 14.4 73.5

See all Product description

Product Description

Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8″ x 13″ top, 3-1/8″ wide front rails, 1-1/8″ wide front flange, 1-3/4″ rear rails, 1-3/16″ wide rear flange and 3″ wide steps.

From the Manufacturer

This medium duty fiberglass stepladder has a 225 pound duty rating (type II). It has nonconductive fiberglass rails for added protection in case of electrical hazards. The molded plastic Tool-Tra-Top is convenient for tools/paint can and slots for paint roller tray with a paint can hook on the back side of the top. Durable, rugged molded plastic braces at the bottom include slip-resistant-foot pads. Other features include slip-resistant Traction-Tred steps and external pinch-proof spreaders.

Product Description

An unique ladder that will lock by the foot to extend from 32 In. to 12-1/2 Ft. Great for small storage areas because of the compact closed height of 32 In. Engineered/manufactured to meet or exceed rigid industrial standards. Constructed using airplane grade aluminum alloy. Safety features include: Angled thumb release mechanism to ensure proper hand position and No-pinch closure system with yellow padded side sections, nonslip end caps, integrated carry handle and heavy-duty closure strap. Double over molded feet ensure traction. Storage dimensions: 20 In. W. x 32 In. H. x 5 In. D. ANSI Type II duty rating 225 Lb. load capacity.

Amazon.com

Designed for do-it-yourselfers and built to meet industrial quality standards, Xtend & Climb Home Edition Telescoping Ladders are a sensible alternative to traditional bulky extension ladders. Lightweight and compact, these ergonomic ladders bring ease of use to everyone in your household. Whether you need to change light bulbs or access your crawl space, you’ll love how your Xtend & Climb Home Edition Ladder opens and closes rung by rung for smooth, safe operation and easy storage.

Home Edition Telescoping Ladders At a Glance: Household telescoping ladder extends by the foot and locks in multiple positions Red/green locking tab indicators for safe operation No-Pinch Closure System; non-slip end caps for support Integrated handle for portability Six-month warranty on parts and repair

Extends and locks by the foot, easily adjusting to whatever height you need. View larger.

Extends and Locks by the Foot
Xtend & Climb Home Edition Telescoping Ladders extend and lock by the foot, easily adjusting to whatever height is needed for your task. This comes in handy when you don’t want the hassle of lugging around a heavy extension ladder. Just open up your Xtend & Climb Home Edition rung by rung to your desire height, and up you go.

Safe and Easy to Operate
Designed with safety in mind, each of these telescoping ladders features a No-Pinch Closure System, as well as red/green tab indicators that let you know when the rungs are locked into place and the ladder is safe to climb. An angled thumb release ensures proper hand positioning and the ergonomic design allows for smooth operation and easy adjustments, even for those with smaller hands. In addition, each Home Edition ladder has non-slip end caps that help keep it firmly in place.

Carry and Store Anywhere
Xtend & Climb Home Edition Telescoping Ladders are great for use in those hard-to-reach areas where it’s difficult to maneuver a traditional extension ladder. Each Home Edition ladder can be transported with its integrated carrying handle to the most confined areas in and around your house, and then extended to the desired length once you’re there. For further convenience, these ladders can be used with durable carry cases (sold separately), and they store compactly in your garage or trunk.

Constructed with Durable Materials
Made of Aerospace Engineered 6061 alloy with a Clean-Touch anodized finish, each heavy-duty Xtend & Climb Home Edition ladder has rungs that are built tough to ensure sturdy footing. And with a 225-pound ANSI duty rating, each ladder can easily withstand around-the-house jobs.

Each Xtend & Climb Home Edition Telescoping Ladder is backed by a six-month warranty on parts and repair.

What’s in the Box
Xtend & Climb Home Edition Telescoping Ladder.

Home Edition Telescoping Ladders
Model	750p	760p	770p
Height Open	8-1/2 feet	10-1/2 feet	12-1/2 feet
Height Closed	27 inches	29-1/2 inches	32 inches
Width	18 inches	18-3/4 inches	20 inches
Depth	3-3/4 inches	4 inches	5 inches
Weight	16-1/2 pounds	19 pounds	27 pounds
ANSI Duty Rating	Type II (225 pounds)	Type II (225 pounds)	Type II (225 pounds)

See all Product description

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy werner multi-position ladder 225 lb, eg:

• What are Top 10 werner multi-position ladder 225 lb for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 werner multi-position ladder 225 lb to buy?
• What are Top Rated werner multi-position ladder 225 lb to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) werner multi-position ladder 225 lb?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for werner multi-position ladder 225 lb.
• Before deciding to buy any werner multi-position ladder 225 lb, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose werner multi-position ladder 225 lb and What you should consider when buying the werner multi-position ladder 225 lb and Where to Buy or Purchase the werner multi-position ladder 225 lb. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 werner multi-position ladder 225 lb of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about werner multi-position ladder 225 lb.

Conclusion

By our suggestions above, we hope that you can found werner multi-position ladder 225 lb for you.Please don’t forget to share your experience by comment in this post. Thank you!